20 Most Recent Patton (HASF1016UC) Stand (Pedestal) Fan - Page 2 Questions & Answers

If you are up to disassembling your motor, you will find a thermal cutout near the windings which frequently fails open. Replacements are readily available, or just jumper it out. If the bearings are shot or the windings burned you're out of luck. Trust me, a new motor will cost more than a whole new fan.

u can get a replace blade from hard wares and fan shops also try ebay and oztion

Question edited for clarity. This appears to be a Walmart, Amazon, eBay special without a maker website which usually means made in China and sold in bulk. There is limited help here and some videos. Motor and Capacitor wiring all works to the same diagram. https://www.google.com/search?q=20+inch+patton+high+velocity+floor+fan+wiring+diagram ..

To purchase a replacement knob for your Patton U2-1287 fan, you can try the following options:

1. Manufacturer's website: Visit the official website of the manufacturer, Patton Products Company, and look for a "Replacement Parts" or "Accessories" section. They may offer replacement knobs or have a customer support contact you can reach out to for assistance.
2. Online retailers: Check popular online retailers such as Amazon, eBay, or Walmart. Search for "Patton U2-1287 fan knob" or similar keywords to find compatible replacement knobs. Be sure to read the product descriptions and reviews to ensure it is the correct fit for your specific model.
3. Local appliance repair shops: Visit local appliance repair shops or stores that specialize in HVAC or fan parts. They may carry replacement knobs or be able to order one for you.
4. Contact customer support: Reach out to the manufacturer's customer support directly via phone or email. Explain the issue and provide them with the model number and any other relevant details. They may be able to assist you in finding a replacement knob or direct you to an authorized dealer.

When contacting suppliers or searching online, it's helpful to have the model number of your fan (Patton U2-1287) and any additional information about the knob size or design. This will ensure you find a compatible replacement that fits properly. Alternatively, if you cannot find an exact replacement knob, you could consider using a universal fan knob that is compatible with your fan's control switch. Universal knobs are designed to fit a range of fan models and may offer a suitable solution.

http://www.pattonproducts.com/service-and-support/service-and-support.html

https://www.amazon.com/s?k=fan%2Flight+grill+for+a+patton+bath+exhaust+fan+model+7100L&ref=nb_sb_noss

if you take a picture of the post the knob will be screwed onto and bring that pic to your local hardware store hy can usually match you up with some sort of generic knob

neither one, check power cable and switch

Most have a one-time thermal fuse wired into the motor. You would have to remove cage and fan blade, unscrew motor mounts, open motor casing, locate fuse by cutting open or sliding off the thermal sleeves, cut fuse out and resolder a new thermal fuse in. Should be able to locate replacement thermal fuse online. Can also just splice ends together but then you lose thermal protection and a fire can result. It is a good temporary fix to diagnose if you have burnt out one of the motor coils.

Best place usually is grangers if you just need a motor. Take in motor and they can match up the exactone for you.

NO, you need to replace the switch.