20 Most Recent HP Compaq dc7700 PC Desktop - Page 4 Questions & Answers

music download software http://100-downloads.com/download.php?p=682 spotify Instant and legal access to over 10 million music tracks http://www.artistdirect.com/music http://mobile.afreecodec.com/free-songs-download-87079.html once the music starts to download a browse option will open where you will need to select if you want to run or safe

you should always keep your antivirus up to date when using any file sharing programs on the internet

hope this helps

Make sure the battery is in. Plug it in to charge the battery Wait 6 hours. Press the On button. Or it is under warranty, contact HP Support. ..

You do not instal it, you log into it.

Take the computer to a qualified technician, who can replace the keyboard, as the least-expensive "try" at trouble-shooting.

Since a keyboard transmits "codes" to the motherboard,
e.g., left-shift-has-been-pressed, and left-shift-has-been-released,
and the motherboard interprets those codes, it is NOT likely that
the motherboard is misinterpreting the codes, especially given that
the "bad' letters are in a straight line on your keyboard.

Find an external USB keyboard, and plug it in.
If it works correctly in the first 15 minutes, then the problem is NOT the motherboard.

There are plastic clips to hold the keyboard. With a suitable flat screwdriver, you can open it. You can damage the plastic body if use force to open it.

This error message indicates that the diagnostic tool is unable to perform the tests because the smart check and short DST are not installed2. To resolve this issue, you can try installing the HP Diagnostics UEFI tool3. Once installed, you can use it to diagnose hardware errors and run tests on your hard drive3.If you are still unable to resolve the issue, you may need to contact HP support for further assistance3. I hope this helps!

hp dv4-1430us, CCFL are all dead now.no USB devices, nor CD tray full.Rule #1 no 14 year old battery good here. ever.the big one (drops out) and the coin cell are dead.the latter can not be ignored dead ever. if you let it die BIOS GOES NUTS (mad) acts dead or lies to you.BIOS needs a good coin cell, or goes to CHAOS.end bad batteries now. step 1 on all laptops on earth is, remove the big battery and see if it runs on AC power pack only (even forever if not mobile used) so splash screen and bios is dead still.step2 hold the power button down for 10 seconds and release. screen works now,? if not do that 1 more time, 10 seconds and release. ok the screen is still dead. so now point a flash light to the screen (dim room) power on PC again same way do you see data now, yes, 'the CCFL lamps are dead. I assume the brightness key is UP.Fn key. there are 20 more parts to fail and cause this. (shorted) the Nivida chip does not REMOVE ever and worse,, omgNOR IS NVIDIA chip there at all, hark.! Intel Graphics Media Accelerator (GMA) 4500MHDonly this is there, for Graphics.(video) period.try?> the vga port connected to video vga monitor will work(test)hp sadly ended support on DV4-1000 series, only 3000 up.if you need the 20 tests to find the other 20 causes ask.even a bad AC power pack is one.or wrong one. (oops)and lots of shorted modules inside. I posted this 100 of times, on on HP DV PCs posted here.and they are are all , mostly dead. 14 years old, CCFL are deadand there is no NVIDIA here period!@ or a broken jack at PC rear, 19vdc jack cracked, inside or outside.fails all tests, above.jack bad.do not attempt to flash the bios on any sick PC like this dead.you will brick it , do not listen to youtube kiddies.tell how far you get and we can go farther. ask, for the steps. 6.jpg">

The battery is leaking here and you need to get your computer repaired and looked at by a professional.Or buy a new one.

https://helgeklein.com/blog/setting-up-mobile-broadband-wwan-on-hp-elitebook-8560p/

https://helgeklein.com/blog/setting-up-mobile-broadband-wwan-on-hp-elitebook-8560p/

You need to replace the charger. It's a 65W 18.5/19.5V unit. This https://www.amazon.com/Adapter-Charger-EliteBook-Galaxy-Bang/dp/B01CL22AL6 is a generic compatible charger. Walmart has an HP charger here: https://www.walmart.com/ip/Genuine-HP-Power-Adapter-Charger-Compatible-with-EliteBook-2560p/762619019 . Note: these are for the US electrical system. Make sure to get the right type for your location. I wish that I had better news for you. Cindy Wells

The P6 and P7 connectors you found inside your HP 6000 tower are indeed related to the CD/DVD drive. They are typically used to provide power and data connections to the drive. Here's how you can connect them properly: 1. Power Connection (P6): The P6 connector is usually a 4-pin Molex power connector. It provides power to the CD/DVD drive. Locate a corresponding power socket on the back of the CD/DVD drive. It should have four pins and match the shape of the P6 connector. Connect the P6 connector to the power socket on the drive. Ensure it is securely attached. 2. Data Connection (P7): The P7 connector is usually a 40-pin IDE or SATA data connector, depending on the type of CD/DVD drive installed. Locate the corresponding data socket on the back of the CD/DVD drive. It should have either a 40-pin IDE connector or a smaller SATA connector. Connect the P7 connector to the data socket on the drive. Make sure it is properly aligned and securely connected. After connecting both the power (P6) and data (P7) connectors, you can close the tower and start the computer. Windows should then detect the CD/DVD drive, and it should appear in the Device Manager. If the drive is still not recognized, there might be additional factors at play, such as driver issues or hardware problems with the drive itself. If the CD/DVD drive continues to have issues or is not recognized by the system, it may be necessary to troubleshoot further or consider replacing the drive if it is no longer functioning properly. Please note that the exact connector types and locations may vary depending on the specific model and configuration of your HP 6000 desktop computer. If you have difficulty locating the appropriate connectors or need further assistance, it is recommended to refer to the computer's user manual or contact HP's customer support for precise instructions tailored to your specific model.

Better to have FULL 'make model' and the Service Tag Number, but it appears to be a well documented issue. If you want to fix the HP laptop not turning on power light blinking issue, you must first check the BIOS battery. Usually, this is located near the motherboard. To remove it, you need to press and hold the power button for about 30 seconds. This should restore the laptop's BIOS.

HP Laptop Not Turning On Power Light Blinking

hplaptopservicecentres.com https://www.hplaptopservicecentres.com > hp-laptop-not-...

Solved: Laptop Won't Turn on, Blinking lights

hp.com https://h30434.www3.hp.com > td-p Dec 24, 2015 - Hold down the Power button for a full minute. Plug in the AC Adapter ( leave the battery out for the moment ) and see if the notebook will start. Regards,. DP- ... Laptop power button blinks when I try to turn it on Apr 14, 2019 Power Button Blinking - HP Support Community - 5951283 Jan 21, 2017 laptop won't turn on, power light just blinks on and off May 27, 2018 Laptop Won't Power On- Power Light Blinking - HP Community Jan 29, 2020 More results from h30434.www3.hp.com

Computer beeps or a light blinks during startup

hp.com https://support.hp.com > ish_1997210-1528385-16 52 steps 1. Turn off the computer. 2. Disconnect the AC adapter. 3. Disconnect all nonessential peripheral devices, such as printers, scanners, external hard drives.

It appears to be a known issue Fix 1: Hard reset your laptop Remove the power, hard drives, the battery and any attached peripheral devices. Press and hold the power button for 60 seconds and release. Put your battery in and plug the charger. Then don't plug anything else.Nov 20, 2019

[Solved] HP laptop black screen - Quickly & Easily - Driver Easy

https://h30434.www3.hp.com/t5/Desktop-Wireless-and-Networking/Ethernet-port-not-working/td-p/7211925

If you are experiencing issues with HP Support Assistant, here are a few steps you can try to fix it:

1. Update HP Support Assistant: Make sure that you have the latest version of HP Support Assistant installed. To check for updates, open HP Support Assistant and click on "Settings" > "About".
2. Restart the HP Support Assistant Service: Press "Windows key + R" to open the Run dialog box. Type "services.msc" and press Enter. Scroll down and look for "HP Support Assistant Service", right-click it and select "Restart".
3. Clear the cache and temporary files: Open HP Support Assistant and click on "Settings" > "Health Analysis". Click on "Clear selected" to clear the cache and temporary files.
4. Run HP Support Assistant in compatibility mode: Right-click on the HP Support Assistant icon on your desktop, select "Properties" > "Compatibility" tab. Check the box for "Run this program in compatibility mode for" and select the previous version of Windows.
5. Reinstall HP Support Assistant: If none of the above steps work, try uninstalling and then reinstalling HP Support Assistant. To do this, go to "Control Panel" > "Programs and Features" > "HP Support Assistant" > "Uninstall".

If you continue to experience issues with HP Support Assistant, you can contact HP support for further assistance.

There could be several reasons why your HP laptop is not turning on and not charging even after installing a new power button board and DC in port. Here are a few possible causes and troubleshooting steps you can try: Battery: Even if the laptop is connected to the charger, if the battery is faulty or dead, the laptop may not turn on. Try removing the battery and plugging in the charger directly to the laptop. If the laptop turns on without the battery, then it's likely that the battery needs to be replaced. Charger: Check if the charger is working properly. You can try using another charger with the same voltage and amperage to see if the laptop starts charging. If the laptop starts charging with a different charger, then your original charger may be faulty. Power Jack: Make sure the power jack is properly connected to the motherboard. If it's loose or not properly seated, the laptop may not charge or turn on. You can try reseating the power jack or replacing it if it's damaged. Motherboard: If none of the above steps work, then the problem may be with the motherboard. A damaged or faulty motherboard can prevent the laptop from turning on or charging. In this case, you may need to take the laptop to a professional repair technician or consider replacing the motherboard. In summary, the laptop may not turn on even when connected to the charger if the battery is dead or faulty, the charger is faulty, the power jack is loose or damaged, or the motherboard is damaged. It's important to troubleshoot each of these components to identify the root cause of the issue.

It sounds like you have a faulty battery or the laptop has suffered a power surge. To resolve the issue, you can try a few things. First, try resetting the laptop by holding down the power button for 30 seconds. If that doesn't work, try replacing the battery with a new one. If the laptop still won't turn on, it's likely that you sustained a power surge in the DC port and will need to get it serviced at an HP authorized service center.

open cover and you will see the answer to your question. 2 AA batteries required use alkaline to a brain surgery easy to do.