20 Most Recent Dell Dimension 4600 PC Desktop - Page 7 Questions & Answers

Open the computer, and check if the cables that go to the CD/DVD drive are connected. If so, try downloading and installing the drivers for the disc drives. I hope you get it fixed!

Hi,here is a small trick that can help you to eject a drive.restart the computer. In front of the drive ther will be a small tiny hole.insert a paper pin into the hole and press it gently. The drive would eject out.You can also trystart->run->type"devmgmt.msc"click on the + symbol of CD/DVD drive. .rt click on it->select uninstall.restart the computer and check .it will work.

Check your bios settings to make sure your video settings are correct for whatever card you're using. It sounds like you have a conflict between an onboard video card, and an aftermarket card.

your speakers will plug into the green line out jack on the back of the computer

The fix will depend on exactly what is wrong. The messages mean that your computer can't read the hard disc and find a boot OS. The drive may have failed, the cable might be loose, or the MBR (masterboot record) is bad. First make sure that you do not have a CD/DVD in your optical drive, a floppy in your 3.5" drive or an external hard drive attached to one of the USB ports. (The computer may be trying to boot to one of them.) Next press F2 when you turn on the computer (press repeatedly). This will let you enter the BIOS to set the disc boot order. (Check that the hard disk is listed first. This also indicates that the computer sees a hard drive in the machine.) If you get the error message again, try the entire procedure again from turning on the computer.Next try using the appropriate Windows install/update disc to repair your system.(The Dell 4600 came with XP and you need the correct SP on the disc. If you kept up on the updates, it should be SP3.) Put the CD in the optical drive then restart the computer. Press F12 repeatedly to get the boot selection menu. (The same repeat routine may be needed if you miss the timing.) Use this disk to enter the Recovery Console and attempt to repair the Master Boot record.Use the directions here: http://support.dell.com/support/edocs/systems/dim4600/en/4600i/sm/index.htm to check if the cable is connected properly. You will need to open the case.This Dell came with an IDE hard drive. These often have a jumper that indicates the boot order. The jumper must be set to master or cable select and be attached at the master position on the IDE cable. This is the connection at the very end of the cable. The IDE cable can come loose from the motherboard, as well. You can also try a different cable. The final option is to replace the hard disc. Unplug the old hard drive from the IDE cable first. You'll need the Windows install disc and then to reinstall all of your drivers and programs. Move the bad disc to the slave position on the IDE cable. See if you can salvage any of your files from the hard drive. (Sometimes, putting the drive in a ziploc bag and placing it in the freezer for several days will let you read the disk when you put it back in the computer.) I hope this helps. Cindy Wells

haveu formmated your disk & installed an operating system ie Win7/Xp it seems u have not got an operating system.

You can upgrade the more the merrier in my opinion however Dell can often be integrated parts that means you have to purchase goods from Dell. You may have a model that is not that way. So depending check out your RAM and see how much you have, you can always get more but there is a limit on the board. So go to Dell.com and check out the stats of your motherboard for upgrades to that board. Go to support and downloads. Or surf around do not trust just any web page for this information Dell is articular with its boards. You can always get a Combo DVD-RW Combo which will read and write CD's as well. That is why it is a combo drive. They fit just about any computer and you can get those online cheap or your local retailer. Video cards are integrated in the board see if you have PCI or AGP slot available it depends on your model. You can use a video card other than the one attached to the motherboard. Make sure the slots are compatible. There is usually one AGP and several PCI slots maybe one or two extra depending on the case and board. So you have your research and work cut out for you. I hope I somewhat explained what is entailed in an upgrade for your Dell start at the dell.com website first and seek out your specific model. I have provided a link for you Click This

Remove Power Cord then press and hold the power button for 30 seconds, then put the cord back in and try to start it.When you press the Power Button are you hearing the fans run, the disk drive running, the cd drive click and the light on it comes on for a second or two?Anything shows up on the LCD Screen?If you press the power button and absolutely nothing is happening then you most likely have a bad power supply. If you press the power button and you start hearing beep sounds or blinking lights in a continuous pattern (ex. 1 long followed by 2 short) then you have a motherboard issue. Those beep sounds and blinking lights tells the technician what is going on with the computer.

it sound like you eather need a new video card or there is something wrong with your moniter.

thanks
hope this help you

so you're saying that the computer keeps rebooting? If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

Use System RestoreTo use System Restore, first restart the computer by pressing[Ctrl][Alt][Delete]. When you see the message Please select the operating system to start or hear the singlebeep, press [F8] to display the Windows Advanced Options menu. Now, select theSafe Mode item from the menu and press [Enter].Once Windows XP boots into Safe mode, click the Startbutton, access the All Programs ' Accessories ' System Tools menu, and selectSystem Restore. Because you're running in Safe mode, the only option on theopening screen of the System Restore wizard is Restore My Computer To AnEarlier Time, and it's selected by default, so just click Next. Then, followalong with the wizard to select a restore point and begin the restoration procedure.Let me know if it helps you.Use system utility tool like RegInOut to remove unwantted files and fix registry and windows errors.

Try these steps, hope they will help you:1. Copy all your files and documents to an external storage device.2. Shut down the computer.3. Turn the PC back on and hit the F8 key repeatedly until the Advanced Boot Option Screen appears.4. Click "Repair Your Computer" if you are not already on it and then press ENTER5. choose your country and click OK6. On the "System Recovery Options Screen" click "Restore Application" which is the last option.7. Follow the on-screen instructions8. When prompted, click on "Full Factory Recovery"9. "Next"10. Click "Yes"11. you will notice for a while it seems like nothing is happening, give it some time.12. After some minutes, recovery will complete and you click "Finish"Let me know if it helps you.Use system utility tool like RegInOut to remove unwantted files and fix registry and windows errors.

System restore:To use System Restore to restore Windows XP to a previous state, follow these steps:

• Log on to Windows as an administrator.
• Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore.
• On the Welcome to System Restore page, click to select the Restore my computer to an earlier time option, and then click Next.
• On the Select a Restore Point page, click the most recent system restore point in the On this list, click a restore point list, and then click Next.
• Note A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.
• On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer.
• Log on to the computer as an Administrator. Then click OK on the System Restore Restoration Complete page.

If you successfully restored your computer to a previous state, and the computer performs as expected, you are finished.Use asystem utility tool like RegInOut to fix corrupt registry and windows files.For Restoring in Windows 7: http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7Hope it works for you.

? I'm not sure what your question is, but replacing the fan on a dell dimension is pretty easy. Here are the instructions: http://support.dell.com/support/edocs/systems/dim4600/en/4600i/sm/parts.htm#1139391And heres a link to buy one off of amazon: http://www.amazon.com/Dell-K0456-Assembly-Dimension-OptiPlex/dp/B000MME1TW

Do you mean dell dimension 4600? If so the SN is usually on the sticker with the CE and other approval logos, on the back of the side panel

Re-open it.Maybe it sucks.electronics wholesale

It won't have a wireless connection built into the computer. You'll have to purchase a separate dongle for a wireless connection. You can pick up a wireless adapter for around $30 USD.

It means you need to install audio driver first reinstall old driver if installed then download new driver from your computer menufecturer web sites then install.If you have dell computer you can download from below link.Click hereSelect your computer model and download driver for your os then install.Let me know if you need further assistance.Thanks for using FixYa.