Siemens Gigaset A140 Cordless Phone - Answered Questions & Fixed issues

Here is manual. SIEMENS Gigaset A140 Manual

Check that the connections are clean and the battery is good. Interstate Batteries carry lots of batteries and can make you one if they don't have what you need.

If by "handsfree" mode you mean headset mode, it may help to plug and unplug the cord into the phone a few times, it could be stuck on the headset mode and this action may fix it. If by "handsfree" you mean speaker mode, the speaker button should do it, but if not, it could be broken.

due to expiry of validity:()

Here is your manual:

http://gigaset.com/medias/sys_master/A31008-M1643-L101-1-7619_16-08-2005_body_NET.pdf

I hope this pdf will be usable for you.
Thanks.
gylacz

Hi my friend
I have inserted a link to the manual below. http://www.siemenssa.co.za/A140_A240_Manual.pdf
The manual should load straight away. You can download it to you computer as well. If you can't see anything you may need to download a PDF viewer such as the one below.
http://get.adobe.com/uk/reader/
Hope I have Helped, Alan

User manual can be downloaded from this link, just click HERE.

current will stop the phone line is stop. on use base. how can remove that?

Handsets should be able to be registered by placing them on the main base and pressing and holding the paging/registration key for 3 seconds. The batteries need to charged and discharged to condition them to maximize the batteries' life.

More info at

http://gigaset.com/hq/en/product/GIGASETAL140.html?tab=service&mode=register
http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries

Hi.
:
Here you go: Gigaset A140/Gigaset A240 english

dont use the charger it will damage the battery. check your a.c. voltage outlet it may have above 120 v ac on it, other appliances will also damage. the charger converter circuit has the problem

hi , try this link            http://www.ps2netdrivers.net/manual/siemens.gigaset.a140/

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Kindly let me know if you have any difficulty in downloading the manual.

Thanks for using FixYa.

just open the mobile menu click on phone setting then scroll down to call setting,click on it and you will see call divert click on it also,there you see call divert cancel then click on it.
please comment on how it work by rating or voting me thanks.

download it from here

sir, usually this problem occurs due to dead battery. just change the battery and try

A noticeable malfunction of cordless phone due to batteries discussable

1. The cordless phone allows to acquire calls away from the receiver area
2. The cordles phone requires frequent battery charging becaus not designed for extensive sessions away from recharge docking station.
3. The further away the phone is from docking requires more battery

Problems with batteries discussable
1. a malfunctioning battery continuous to beep
2. A malfunctioning phone batteries requries replacement completely, cannot be recharged any more, remove, discard and acquire a new battery to replace soon as malfunctioning beeps are heard lasting several attempst to recherge without seizing beep.

rest yar celukar rests setings ok

Thats because there are too many handsets registered to base OR it can't find the base. Did you set it to register then pressed the little tab in on the bottom of the base? You have to hold tab down and keep phone close to base (a foot or so). If handset goes out of reg mode, you have to put it back in, then quickly press base tab down again before it stops.