20 Most Recent Lexmark Z1300 InkJet Photo Printer - Page 3 Questions & Answers

Here's the link for the available Lexmark Z1300 printer drivers: http://bit.ly/bNJ6oF. Click on the Microsoft or Macintosh drop-down found below the page to choose the version of your computer's operating system. Download and execute the file. Thank you for choosing Lexmark.

http://www.soft82.com/download/windows/lexmark-z1300-printer-driver/

hi...

while you print please check weather you selected the printer in which you need to print.

to select it
Go to 'printing option'------>'properties',there is a drop down arrow to select the printer please select the correct printer and try printing

thanx

you must have VISTA or 7 for windows then for its not compatible

Hi! Have you tried connecting it to the pc to adjust the font? If not, then its a good idea to do the procedure using the pc linked to the printer via usb cable. Hope this helps and have a good one!

Drivers and software for your printer can be download from the link below.

http://support.lexmark.com/index?segment=SUPPORT&userlocale=en_ca&locale=en&productCode=LEXMARK_z1300&page=product#1

Robert from Blitware

http://support.lexmark.com/index?locale=en&userlocale=EN_US&productCode=LEXMARK_Z1300&page=product&segment=SUPPORT#2

Here is your driver please do leave postive ratings and feedback for your fee answer today. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

the only communication that can be wrong is the driver ...and the cable ....As long as the printer is on and seam to be functional ...reinstall the driver ..if you have it on disk ..or download it from here ...
http://support.lexmark.com/index?page=content&id=DR11015&actp=search&viewlocale=en_US&userlocale=EN_US&segment=DOWNLOAD&productCode=&searchid=1275996304520
if you are sure the driver is ok ..just check the cable for damages..and to be well plugged in both sides...

u check ur printer first.
how to check printer?
answer : u change ur os to winxpsp2 or win 7
and try again
if any assistance please mail [email protected]

USB printer cable and a driver is what you need. Get the driver for your OS at www.lexmark.com/support

You can download your drivers from the following website

http://www.siliconguide.com/drivers/device/198/

Unplug the printer for a few minutes. Then plug it back in. Go to control panel printer page and click on the properties of the printer installed. You will then tell it to clean and initiallize the cartridge. I

Do you ever put a lot of paper in it because if you do maybe that is the problem or it is damaged and you need to get a new printer that is cheaper than you got. Also, when you get it make sure it works.

Hi there

Maybe it is that your laptop is Vista Or win 7 and the CD driver that is on the disk is for XP.

Hi there
You can do this by using a program microsoft word, any size and any colour you want
All the best Pineworks

Hi There

Summary

Usage of compatible ink and leave the printer idle too long may cause printhead clogging
What should you do if you get this problem. Relax; you may recover the printhead by unclogging it. Follow these steps to unclog the printhead

1. Right click in the printer driver name
2. Select Properties menu
3. Click Maintenance tab
4. Click on cleaning sign for regular cleaning. Perform this up to 3 times.
5. If this does not work, perform Deep Cleaning

And if that not work

Some times it needs a good clean up but this is up to you if you want to do this,
But after you done this prime the printer so it gets the inks back in the heads, it may take a little time for the inks to work.

Ok.

There is fluid cleaner for this but I can never find any in the shops the only ones I seen is when they sell them in Tesco but they come in with the ink refill bottles so I just use worm water by it self on a cloth and dabbing on the heads to clean them, it will not harm the heads but not to much water.

Some heads are on the inks them self but some have them inside the printer so I not know your printer so if the heads are inside you need to get them out you may find that some heads will just clip out put some need to be unscrewed so you got to know how they come out so be careful and not push to hard on them, if the heads are on the ink then it is a easy job to clean them,
It worth a try it worked for me more than ones.

Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

Hi Not sure witch windows you have so I put the XP and Vista just click on the one you need.

You can download a driver from my website then you can use the driver to set your printer up.
Just click on this link and it will download for you, and it is best to save it on your desktop so you can find it.

This is for the Lexmark-Z1300 XP and Vista.

Click Link = XP http://www.4all2sell.com/driver/Lexmark-Z1300-XP-32Bit.exe
Click Link = Vista http://www.4all2sell.com/driver/Lexmark-Z1300-Vista-32Bit.exe

Ones you have downloaded just double click on it to run it. And follow the intrusions.
You not need the serial number.

All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best. Pineworks
All files on my website are only there for a limited time.

Go to www.lexmark.com you the driver manual and everything
unaasp192