20 Most Recent
Cisco ASA 5510 Firewall - Page 3 Questions & Answers
Installation of cisco asa 5510 firewall
If you can't get the manament working initially I suggest the following
Setup a console connection
Type "enable" and press enter to access priveleged exec mode on the ASA
Type "config terminal" and press enter to access configuration mode
Type "configure factory-default" and press enter to load default settings.
Assign a static IP to your PC of 192.168.1.5 and try to browse to
https://192.168.1.1 (PC is plugged into management interface)
You should be prompted to begin using ASDM
Export and import all configuration in Cisco ASA 5510
Hello ,
the Steps which u want to export and import configuration in Cisco ASA5510
1- connect yourself to your Cisco gateway by IP
2- Get TFTP server to your PC like( solarwind , Tftp server , ... ) any tftp download and upload program
3- now u need to copy running configuration to your pc by order
#copy run tftp , then follow the steps
NOTE: u should be in the same network or u need your pc and cisco box both have publick IP
4- if u want to put prepair config files to your gateway , you will need to type order
#copy tftp run , then foloow the steps
If u need anything else please let us know by leave your completely request or join us with www.fixya.com
Regards,
Samer
ASA 5510 sec - bun k9
Basic Commands
pixfirewall(config)#
hostname PIX
!--- Naming the PIX is optional.
PIX(config)#
nameif ethernet2 fo security20
!--- Naming the interface is optional. It is recommended that you
!--- hardcode the speed/duplex.
PIX(config)#
interface ethernet2 100full
!--- Bring up the interface.
PIX(config)#
ip address fo 192.168.1.1 255.255.255.0
!--- Assign an IP address.
Failover Commands
PIX(config)#
failover ip address fo 192.168.1.2
!--- IP address for the failover link.
PIX(config)#
failover lan unit primary
!--- This unit is primary
.
PIX(config)#
failover lan interface fo
!--- The 'fo' interface is used for LAN failover.
PIX(config)#
failover lan key cisco
!--- The Pre-shared key.
PIX(config)#
failover lan enable
!--- Enables failover.
PIX(config)#
failover
!--- Start the failover process.
This message appears on the console:
LAN-based Failover: trying to contact peer
LAN-based Failover: Send hello msg and start failover monitoring
ASA VPN setup
this has been nicely explained here:http://www.computerfreetips.com/Cisco_router_tips/ASA-VPN-tunnel.html
3/12/2012 12:25:11 PM •
Cisco ASA...
•
Answered
on Mar 12, 2012
Cisco Router Customer Care Phone'@#[+1^84433O*233O-] numbeR USA
Warning SCAM - DO NOT CALL THESE NUMBERS. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website
Cisco Router Customer Care pHoNe @{+l^84433O*233O} nUmBeR USA
THIS IS A SCAM- DO NOT CALL THESE NUMBERS. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website
Cisco Router Customer SuPpoRT pHoNe @{1^84433O^233O} nUmBeR USA
THIS IS A SCAM -- DO NOT CALL THESE NUMBERS. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website
Cisco Router TeCh SuPpoRT pHoNe #@{+184433O^233O~} nUmBeR USA
-THIS IS A SCAM -DO NOT CALL THESE NUMBERS. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website
Not finding what you are looking for?