20 Most Recent Canon IXY 1000 Digital Camera - Page 5 Questions & Answers

Hi, please switch modes on your camera and check if the lens goes back in. If not, please use the zoom option to out and check if the lens begins to retract back into it's default position. Otherwise, you can restart the camera 2 or 3 times in a row to attempt to overcome the issue. Thank you.

You will need the LED screen to see the settings. Any LED screen can be used that is the same size and connections.

PSSX10IS_CUG_EN.pdf

http://gdlp01.c-wss.com > gds > PSSX10IS_CUG_... PDF See the PDF manuals available on the Canon website. ... Canon Digital Camera Solution Disk supplied with the camera ... PowerShot SX10 IS. 292 pages

Canon Support for PowerShot SX10 IS

https://www.usa.canon.com > Canon Support Find support for your Canon PowerShot SX10 IS. Browse the recommended drivers, downloads, and manuals to make sure your product contains the most up-to-date ...

PowerShot SX10 IS - Download drivers, software and manuals

https://en.canon-cna.com > ... > Powershot SX series Download drivers, software, firmware and manuals for your Canon product and get access to online technical support resources and troubleshooting.

Hi, The symbol with the moon/stars should relate to taking night-time pictures. The lightening symbol stands for flash (ie light shown when photo is taken). The delay should be due to the flash taking time to charge up prior to the photo. Thank you.

One video that might help, but this is a $500 camera, so take it in for service. It needs to be serviced in a clean dust free lab by men in white coats and cotton gloves. https://www.google.com/search?q=Canon+760d+no+power ...

There is an internal battery that you cannot change. When it goes out, the camera fails. There are several places online that you can send it to for repair

The lens is normally retracted for safety about one minute after you press the button in Shooting mode . To have the lens retracted immediately after you press the button, set the retraction timing to [0 sec.].Choose [Lens Retract], and then choose [0 sec.].

https://youtu.be/KvXEtKaWsME, I'm sure this link will be helpful

Just put it all back together. Together no particular order put the lens back on uh put the camera uh battery. And scan disk back in and then see if it fires.

Firstly check if your SD card is not full yet, secondly from your settings deactivate the flash and try to snap with flash off and thirdly you can reset the camera.
I hope this can help you fix it.

Yes there are converters, but it would be better to take both into a camera shop. https://www.google.com/search?q=canon+eos+60d+sigma+lens+mount+converter ..

Question edited for clarity. Your memory card is too big and beyond the capabilities of the camera. 512Mb is recommended. Page 34 of the manual http://gdlp01.c-wss.com/gds/8/0900001188/01/PSA540_530CUGad-EN.pdf ..

Question edited for clarity. Yes it can, although it won't work by metering the light that is hitting the CMOS sensor. You will use it in manual mode.

Connection to body or battery voltage.

Yes it is possible that the battery is getting weak. Or the button which is of course a switch needs cleaning with electrical contact spray.

Question edited for clarity. Question move from Computers to Canon Camera. There is no 'Reset' only Reset Camera to Defaults. The most likely reason is completely flat batteries. https://www.manualslib.com/manual/355860/Canon-Ixus-80-Is.html?page=177 ..

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive. Or you can use any photo cataloging program.

Try another charging cord. The camera charging cords are just as bad as the phone cords. They just go bad quickly.

There is an internal battery that you cannot replace. IT has to be sent into service.

Use the link EOS Camera Error Codes and Error Messages

remove the film and have it repaired and serviced by Canon. It is worth getting it fixed if you like using film. A number of companies are now making digital backs for cameras.