Top 20 Belkin (F5D7230-4) Router (587009) Questions & Answers

hi the router is not giving IP. restart the router to solve the issue. from ipod delete this wifi network by right click and forget network. connect again. update me

http://www.sitecomlearningcentre.com/products/wl-330v1001/wireless-range-extender-n300

Turn off DHCP and don't connect anything to the WAN port.

You should be able to connect the tv and the router. You may need to avoid to use special characters for wifi password.

Go to settings and connection type and check maximum idle time is not highlighted! Sounds like it is timed to disconnect after a time limit from your description!

Read use user guide

Go to

The cable modem is online and processing traffic

What authentication? PC laptop?

One Push Setup, press wps (or ops) button on router and the button on the device you wish to to connect (assuming device has that feature) and it should set itself up.

What problem? Authenticating to what?

Go to GENERAL ROUTERS RESETING

To restore it to the factory settings press a paperclip into the hole marked "reset" for 5-10 seconds. Do that wile the router is on. Then if you need to set a special password you can connect to it and change the password. To change the password connect to your router by going to your browser on your computer after connecting to your router. The default address for belkin is usually "192.168.2.1" for login its either "admin" or just left blank. there shouldn't be any password. After you login you can go through the settings and change your wifi name and password. Most routers also have many other security options like only allowing certain computers on that you add their mac addresses. Hope this helped. If you need more help just leave a comment.

connect a pc or laptop to the router and login to the router web interface. You will be able to display the password there.

Try port 80? Port 80 is the standard for web traffic. your browser will default to 80 if you leave off the ":81" Try that and add an "HTTP://" in front.

If you forgot the password of the router try resetting it.

look in the settings of the Belkin to see if you can enable VPN Pass-through.Try disabling some of the firewall functions on the belkin to isolate the issue and turn the rest back on.If for some reason this model doesn't work even after the above, try changing the VPN client's connection settings,there are only two to choose from... (click modify on your connection entry, go to the Transport tab > then choose from:IPSec over TCP and IPSec over UDP (port 10000)

Don't install this router with the installation CD, let me know what is your internet provider and lets we can do this manually

Go to Answer Questions All Unanswered

your kindle device should be able to connect the network automatically , if this is not happening try adding the network manually.1.First, make sure you are within range of the network you want to add, and that you know the network name and password (if required).2.From the Home screen, tap Menu and select Settings.3.Select Wi-Fi Networks to display a list of detected Wi-Fi networks.4.Tap Join to enter network details.5.Use the onscreen keyboard to enter the name of the Wi-Fi network that you want to add.6.Once the Network Name has been entered, tap the Password box and enter Wi-Fi password / Network Key using the onscreen keyboard (if required).Tip: Tap the 123 key to enter numbers or symbols. Tap the ABC key to return to the regular keyboard. Tap the Shift key (up arrow) to enter uppercase characters. Your password may include non-English letters (accents, umlauts etc.). To view accent options, press and hold a letter down, and accent options appear.7.Tap ConnectDoes all your wireless devices have weak signal issues?If so , Then problem may be with the wireless router.Try changing the wireless channel on the router by logging into the router interface page.Authentication failed is the message u ll normally get when u enter the password incorrectly.