20 Most Recent Belkin (F5D7230-4) Router (587009) - Page 3 Questions & Answers

What authentication? PC laptop?

Go to

Go to Answer Questions All Unanswered

Go to settings and connection type and check maximum idle time is not highlighted! Sounds like it is timed to disconnect after a time limit from your description!

You should be able to connect the tv and the router. You may need to avoid to use special characters for wifi password.

First, is the Belkin handing out DHCP addresses? If so, do you know what the address is and is your laptop set to obtain everything automatically for the wireless connection?

on the laptop, can you go to a command prompt and type tracert 74.125.79.83 ? see where the hops stop and if it is the Belkin's IP address, then something in the Belkin is not setup to route outbound from wireless clients.

Hope this helps

If you forgot the password of the router try resetting it.

One Push Setup, press wps (or ops) button on router and the button on the device you wish to to connect (assuming device has that feature) and it should set itself up.

192.168.2.1 is the web access page for the belkins router. You can also just download the software from belkins website for you model of router. Run the program and redo the network key.

Let me know

comier957

What problem? Authenticating to what?

belkin router F5D7230-4

wireless works fine, anything plugged in gets cut off after a few minutes.

To restore it to the factory settings press a paperclip into the hole marked "reset" for 5-10 seconds. Do that wile the router is on. Then if you need to set a special password you can connect to it and change the password. To change the password connect to your router by going to your browser on your computer after connecting to your router. The default address for belkin is usually "192.168.2.1" for login its either "admin" or just left blank. there shouldn't be any password. After you login you can go through the settings and change your wifi name and password. Most routers also have many other security options like only allowing certain computers on that you add their mac addresses. Hope this helped. If you need more help just leave a comment.

To log on open your browser and type http:\\192 168 2.1 & use administrator as logon & password.
here is a link for your router. http://www.speedguide.net/broadband-view.php?hw=196

connect a pc or laptop to the router and login to the router web interface. You will be able to display the password there.

look in the settings of the Belkin to see if you can enable VPN Pass-through.Try disabling some of the firewall functions on the belkin to isolate the issue and turn the rest back on.If for some reason this model doesn't work even after the above, try changing the VPN client's connection settings,there are only two to choose from... (click modify on your connection entry, go to the Transport tab > then choose from:IPSec over TCP and IPSec over UDP (port 10000)

Don't install this router with the installation CD, let me know what is your internet provider and lets we can do this manually