20 Most Recent ASUS P5N-E SLI Motherboard - Page 7 Questions & Answers

hi find link https://www.asus.com/support/FAQ/1008859/

at home or work or where (generic answer) RTM all routers have a free manual to read. and all of them tell you. must be wifi dead, after a move to new home? the manual on your router tell how to setup wifi. 2012 router https://www.manualslib.com/manual/415040/Asus-Rt-N66r-Dark-Knight.html?page=2#manual page 17 tells you how to access the routers setup [age

Send it back. It is advertised as being 'strong'. You can try a soft reset, but in my view, unlikely to work. Press and hold the Power Button and the Volume Up button for 12 seconds.

ASUS Transformer Mini T102

https://www.asus.com > For-Home > Everyday-use > A... Built from strong but incredibly light magnesium-aluminum alloy, Transformer Mini is ultra-thin and feather-light, with a tablet that's just 8.2mm thin and ...

• ASUS Transformer Mini T103

  https://www.asus.com > For-Home > Everyday-use > A... ASUS Transformer Mini is the 2-in-1 PC that gives you more freedom and more power ... Because all ports are located on the tablet, they're always available: ... ..

Use a higher amp rated charger, (same voltage and polarity)..but I would suggest letting it complete it's charging cycle before trying to operate it..

Asus do not supply schematics.

https://www.manualslib.com/products/Asus-X555la-5887002.html

Look for the LED pins on your motherboard. One should be labeled HDD+ and one HDD- make sure the cables are plugged into these pins. Doesn't really which color wire to the + or - If it is plugged in the LED on your case could be bad. To test this will need a multimeter. Unplug the HDD cables from the pins. Set the multimeter to measure resistance the horseshoe 1 or 10 Ohms is fine. Stick a probe in each connector if the probes dont fit stick a paper clip in each hold and touch the probe to the paper clips. Dont let the clips touch. If you get no reading then the LED probably burnt out. If the LED tests ok you can leave it unplugged and turn on the computer. Set the multimeter to 10 Volts. Touch the red probe to the HDD+ pin and the black probe to the HDD-. DO NOT TOUCH BOTH PINS WITH ONE PROBE OR YOU WILL SHORT IT. Be careful... If you don't get a reading then there is no voltage making it to the pins.

Did you try manuals.com?

find out what the vga card is then go to the manufactures website e.g. ATI/nvidia/intell

First you need to download this driverupdate us software (for free) and scan your PC. after scanning, driver will be found and you will be able to update in couple of seconds. best of luck

n13219 is actually the asus P8H61 motherboard

If You Are Looking For A Manual For An ASUS Mainboard Model No: N13219 I Give You This Advise: Try To Find And Download It From The Internet Using Google !

go to this site

Try to use some soft to get info about your PC for example: Everest, SiSoft Sandra, HWiNFO... Hope some of this apps wil recognize your graphics adapter.

Schematics are not released or available as they are in house replacement items.

You can use PLEX install on PC and Google TV or try AVIA or Media House through google play

https://www.youtube.com/watch?v=uL97XhontSo

EBAY! https://www.ebay.co.uk/c/15031289895