20 Most Recent Roland VersaCAMM VP-540i Questions & Answers


Could you try
(1) Temporarily stick a white strip over the sensor where it detects the media or
(2) On the length of the media or
(3) Even staple same sized white media below the black one which you can un-staple after printing.
kindly ignore if these are (s) tupid answers

Roland VersaCAMM... | Answered on Mar 23, 2016


Just one Question?
Do you have your LAN Cable tied with your AC power Cable?
I have th same problem on two VP540 after seven years of trouble free working. A few months ago I was reorganizing my shop and I tied up both cables to avoid tangle cables with machine wheels every time I move It.
I think that the noise produced by AC Voltage Affect the VP540 ethernet port.

Roland VersaCAMM... | Answered on Jan 13, 2015


Sounds like the motor is jammed.
This is a scan motor over current error where a large load is put on the motor movement instantaneously. Turn the power off, clear any media jam that may have occurred and turn the printer back on. If the error continues, please contact your local Roland Service Center.

Roland Office... | Answered on Aug 06, 2018

Not finding what you are looking for?
Roland VersaCAMM VP-540i Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Roland Office Equipment & Supplies Experts

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

29663 Answers

Ravi

Level 3 Expert

1682 Answers

Are you a Roland Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Roland Office Equipment & Supplies

  • Roland Office Equipment & Supplies

Most Popular Question

roland sp 540v trying print banner

  • Office Equipment & Supplies
Loading...