HP Compaq nc6120 Notebook - Page 8 - Answered Questions & Fixed issues

goto http://hp.com click support and drivers... type pc model ..choose model ..select driver(blutooth)..download ...install ..restart pc

take it to the service center

The Spoolsv.exe executable file is responsible for handling the printing process on a Microsoft Windows system. Although this process is not crucial to run your Windows system, you must not terminate it until you think that it is causing problems on the system.

To fix spoolsv.exe application error, you will have to remove these files from the system. To do this, perform the following steps on your Windows XP computer:

1. Open Control Panel, select Performance and Maintenance, select Administrative Tools and then select the Services option.
2. In the Services management console, locate the Spooler services, right-click on it and select Stop.
3. Next, open the C:\Windows\System32\Spool\Printers folder. (Here, we are assuming that your Windows is installed in the default C:\Windows folder)
4. Delete all the .SHD and SPL files from this folder.
5. Next, open the TMP folder and delete all old and unused files from this folder.
6. Finally, restart the Spooler service from the Services management console.
   
   Note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Safe Mode to delete the files. To start your PC in Safe Mode, press F8 at system restart and then select the Safe Mode option from Windows Advanced Options Menu.
   
   If deleting the files does not rectify the problem, you must perform a System Restore and rollback your system to the time prior to when the error started appearing on your computer.

• It is important for you to know that application errors can also occur due to virus or spyware infections. In fact the Spoolsv.exe process is also a known backdoor vulnerability that can be planted on your computer for malicious purposes by a hacker.

*Your vote is highly be appreciated. Thanks in advance. Let me know if this fix your problem.

Best regards

1. 
   

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=447347&lang=en&cc=us&prodTypeId=321957&prodSeriesId=447346&taskId=135

visit above link to get your drivers
Wish You And Your Family A Very Happy New Year

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=447347&lang=en&cc=us&prodTypeId=321957&prodSeriesId=447346&taskId=135

go to above website chose your opearting system and download the drivers

You can find drivers from HP here http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3398076&lc=en&cc=us&dlc=en&submit.y=10&submit.x=6&lang=en&cc=us

You need to choose the correct operating system.

Yes, it sounds like a loose connector. It could also be a bad cable. If you want to try it yourself, follow this link for a copy of the maintenance manual:

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=321957&prodSeriesId=447346#2

Good luck and if you have more questions, feel free to ask.
Ron

I would suggest checking the website of your laptops manufacturer on how to access the BIOS Battery.

When you have gotten to it, remove the BIOS Battery for several (10-20) seconds and then put it back in.

Test the charger, it may be fried. It's also possible that you need to replace the jack inside the laptop.

1. Remove the real-time clock (RTC) battery.
2. Wait approximately 5 minutes.
3. Replace the RTC battery and reassemble the notebook.
4. Connect AC power to the notebook. Do not reinsert any battery packs at this time.
5. Turn on the notebook.

Hello Gavrilov,

As I understand that you are facing issue with the Qucik Touch buttons of the volume on the notebook.

If this is correct, install the Quick Touch buttons drivers on the notebook.
Here are the drivers for Quick touch buttons:

Windows XP:

ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29528.exe

or

ftp://ftp.hp.com/pub/softpaq/sp39001-39500/sp39425.exe



Windows Vista:

ftp://ftp.hp.com/pub/softpaq/sp38001-38500/sp38266.exe

You are most likely dealing with a laptop whose power supply has blown/quit working. You are probably going to have to get someone to change out your power supply, or you might just have to buy a new laptop, depending on how old your laptop is, and how much it will cost you to replace the power. Of course, if your laptop is a newer one, then I am sure it will be worth it to get the power supply fixed or replaced. And if it is even so new as to stll have the warranty valid, you can probably get the computer's manufacturer to fix this at no cost. If warranty is still valid, contact them for details. But keep in mind that computer manufacturers also have limits on warranties, and if you spilled something on the screen or inside the laptop, or you are at fault with any other negligence, the tech support people will detect this, and will probably tell you that your warranty is not valid against spills or negligence, thus requesting you to pay for the repair. I hope this helps.

well known fault caused by faulty motherboard,you can disable your usb ports which will stop the annoying fault reports and you can use your latop as normal but obviously you cannot use your usb ports as you have disabled them

click the link below. if it doesn't work copy and paste the code at the bottom of this post to obtain the document you need. you will need acrobat/adobe reader which can be found at www.adobe.com

once you open the manual the info you need is on page 11. it describes the steps to clearing any cmos info and bios passwords
product manual

http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=447346&targetPage=http%3A%2F%2Fbizsupport.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00502970%2Fc00502970.pdf

here is how you should disassemble your laptop

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00502970/c00502970.pdf

i dont see how a usb port can actually be related to your sound but maybe the best solution right now is to simply replace your usb port as it might have been damaged by your external usb keyboard

I research the solution but don't if work for you. this was post by merlin here: http://www.itreviews.co.uk/discuss/2060
this the full context
"
posted: 11.04.2006 01:43
Remove the Battery

Remove the Hard Disk

Remove the DIMM Memory from underneath the Laptop and remove the 2x KEYBOARD screws

Turnover laptop and REMOVE the KEYBOARD by pushing back the 4 x Spring clips between keys "esc" & "F1" - "F4" & "F5" - "F8" & "F9" - "F12" & "DELETE"

Remove the 2nd DIMM Memory and Unclip the Battery from Mainboard.

Leave for 30 minutes then start with mains ONLY no battery or Hard Disk

Hey Presto - BIOS NOW RESET including Password

Switch Off and now put all back together " Hope this help for you. Good luck!

You have to search for the button 3202 battery, remove it temporarily then start it again. please dont 4get your rating. Thanks

Remove the main (removable) battery then remove the AC from the back. Press the power button for 30 seconds. Replace the AC first, then try powering on again.

you can find the mouse properties in :

C:\windows\system32\main.cpl

where main.cpl is the mouse options

It is a well known issue. Details and videos in the link https://www.google.com/search?q=HP+X13-04657+LAPTOP+black+screen ..