Go to tools or tools and settings. Scroll down to blue tooth setting. Make sure the Bluetooth is on and near you phone, The phone should recognize the bluetooth and will ask if you want to pair them. Just click yes and it should work.
Have you already tried to put your headset in pairing mode first? Anyway, to do it, starting with it turned off, press and hold the on/off button for some 5 seconds, until the indicator light is steadily lit (it will flash as it was being turned on, but don't release the button at that phase). Then, make your phone'sbluetooth application search for new devices. After a while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros); By the way, if your headset's user guide happens to be missing, feel free to download it from this location. Hope you are able to sort your problems out.
After registering the bluetooth device ( in the settings> accessory settings> register bluetooth device) you must then go to the audio options in the settings >accessory settings >audio options and switch the input from do not use to use to the name of your bluetooth to turn on the connection from the bluetooth to your ps3
After having the device recognized by the PS3, just go all the way to the right where your friends are listed and select "Start Chat" and select voice chat (it is not necessary to invite anyone into a chat to do this). Go to the little Tool Box for "Chat Settings", then select "Audio Device Settings" and make sure the Jabra BT2080 is selected for Output and Input.
If anything, I found a video that shows you how's it done attached.
hold down the power button until it flashes red and blue and then your phone will be able to find it. I already had my phone searching for blue tooth devices and then i held the power button down and it worked great. No code was needed with my Iphone
This could be due to several reasons such as a faulty battery, a problem with the charger itself, or an issue with the connection between the charger and the battery. Here are some general steps you can take to troubleshoot this issue:
Check the Battery: Ensure that the battery you're trying to charge is not faulty. If possible, try charging a different battery with the same charger to see if the problem persists.
Check the Charger: Make sure the charger is functioning properly. If you have another charger, try using it to charge the battery.
Check the Connection: Ensure that the connections between the charger and the battery are secure and clean. Any dirt or corrosion could interfere with the charging process.
Reset the Charger: Unplug the charger, wait a few moments, and then plug it back in. This can sometimes resolve minor technical issues.
https://www.manua.ls/stanley/bc15bs/manual
If unresolved, you might contact Stanley customer support.
Are you sure you aren't the daughter trying to get around the code? The onus is on your daughter to remember her access code. Your parental code allows you to make restrictions to the phone.The only way to fix it is by doing a Factory Reset. Scrub it clean and start again.https://www.google.com/search?q=hisense+f22+hard+reset..
