20 Most Recent Whirlpool GU2400XTP Built-in Dishwasher - Page 8 Questions & Answers

Yes I have a similar problem... GU2455XTSQ3 whirlpool gold. Hangs up at 52 minutes accompanied by a loud humming that lasts for 1/2 hour to 45 minutes? Then for whatever reson the cycle will continue and complete! This just started 6 months after purchase. Any ideas?

check your drain pump and drain line , sounds like a clog

jalexandruna the lid you opened on the dispenser that has 1-6 is where you pour in the rinse aid. As to if it will help or not, this sand issue may be hard water. Try using a eviromentally friendly detergent which is high in Citric Acid. Or try running a dishwasher cleaner like Dishwasher Magic thru the dishwasher to clean this residue out. Hope this helps

Possible a clean up should solve the issueclick on : Maintenance

QuietGuard3: Clean light flashing 7 times? Press Heated Dry, press Normal Wash, then press Heated Dry again and press Normal Wash again (that's 4 button-presses) and that should fix it.

my whirlpool has power to it but no lights and will not start, replaced micr computer still will not start Water in bottom as if it quit during a cycle

assuming the power circuit breaker is ok and you are getting power to the dishwasher itself, there are other factors that could lead to an outcome of dishwasher not appearing to be powering up.The most likely cause is power supply inside dishwasher is faulty, the controller is faulty or simply the dishwasher display panel is faulty.More likely the dishwasher has suffered a "thermal" trip. The thermal fuse located in the control panel on the door has blown. You may need to replace it. It is item 6 on this diagram

I have a GU2200XTSQ2. Lock light was on, pushing and holding the Heated Dry button turned it off. Not sure why it came on in the first place.