20 Most Recent
Canon i9100 InkJet Photo Printer - Page 5 Questions & Answers
HAVE A DOS BAKERY PROGRAM THAT IS USED DAILY. OUR
There is a workaround that will work for many dos based programs.
It will remove several of the advanced feature from your printers functionality but may solve the problem.
Try this:
Open control panel, switch to classic view if not already in it. Open the Printers folder, then Right-Click on the Canon MF6540, select properties.
Once it opens the instruction may vary slightly for your printer but should roughly be:
1. Select the advanced tab, then click print processor, then select one of the RAW modes on the right and Ok twice to close the windows.
2. Try printing in the DOS program, if it fails, repeat step one and try the next option. If none of the RAW modes work, try the TEXT mode.
If none of these methods work you may need to emulate a LPT Port for the DOS program to Print to, forward it to the Printer and then repeat the above process. DOS programs are notoriously finicky about settings so you will likely have to try several settings to find one that matches.
If your first attempts fail and you need to emulate the LPT port get back to me by adding a comment to this post and I will see if I can find a good emulator to try for you. Or you can buy a router to connect the printer to that already has emulated LPT software such as the Linksys WRT610N. Sharing the printer through such a router creates a virual LPT port on your computer which may work.
If you need more direct help, try clicking my name and clicking Ask Me for paid support. If you can handle the normal speed here in the forums simply reply and we will help you as soon as we're able.
Hope this helps FixYa,
Chris
Orange light on in service mode
Same thing here. Solid light stays on after trying to put into service mode.. did you get any solution before I dump this printer? Thanks
How to Setup Canon Pixma In Macbook?
The functioning of your Mac Book is a little different from Windows. It is possible that this may get you confused. Let's take a look at the steps for Canon Pixma MG2522 setup in Mac. Click on 'Drivers and software' options in your printer and chose the version of Mac OS you are currently using. Start downloading the printer driver on Mac. Then, double click the downloaded file to run it. Now, you have to select the 'Continue' button twice. Thereafter, press 'Install' to add the Canon Printer to your Mac Book.
https://connectmyprinter.com/how-to-setup-canon-pixma-mg2522/
How do I connect a Canon Pixma MG2522 in a MacBook?
The functioning of your Mac Book is a little different from Windows. It is possible that this may get you confused. Let's take a look at the steps for how to connect Canon Pixma MG2522 setup in Mac. Click on 'Drivers and software' options in your printer and chose the version of Mac OS you are currently using. Start downloading the printer driver on Mac. Then, double click the downloaded file to run it. Now, you have to select the 'Continue' button twice. Thereafter, press 'Install' to add the Canon Printer to your Mac Book.
https://connectmyprinter.com/how-to-setup-canon-pixma-mg2522/
How to Reset Canon IR1022IF?
you can make a factory clear , it erase all configuration made .
in control panel make the next secuence
press additional function
press 2
press 8
press additional function again .
service mode (#SSSW )will appear in the screen if doesn't repeat the procedure
with arrows < > Search for item CLEAR
press ok once
with arrows < > Search for item All
press ok once more
the copier will reset and restart, may take a few minutes . if don't restart by itself, turn off and then on from main switch
I have canon IR 2425 has error code E000733-0000 so what shall I do to solve it?
Error code E000733-0000 on Canon IR 2425 indicates that there is an issue with the toner waste container. Here are the steps you can take to resolve the error:
- Turn off the printer and unplug it from the power source.
- Open the front cover of the printer and remove the toner waste container.
- Check the waste container for any blockages or obstructions. If you find any, clean them and reinsert the waste container.
- Check if the waste container is full. If it is full, replace it with a new one.
- Close the front cover of the printer and plug it back into the power source.
- Turn on the printer and check if the error has been resolved.
If the error persists, you may need to contact a certified technician for further assistance as it could indicate a more serious hardware issue.
Not finding what you are looking for?