20 Most Recent Emerson EWF2004 20" TV - Page 2 Questions & Answers

Yes. This set is not digital TV capable.

As there is no input selector button at the front panel of this TV; you can't select its inputs; without a remote control. If you wish to buy its original remote control, contact the authorized service center, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Type in the brand name of your device, in the search box [at the top right] of the display window, and press enter to get all related posts. It will make surf easy.

0026, 0022,0025. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls.Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order.Pull up older posts. Surf the site with patience. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/

I would unplug it from the wall for a while and see if that will help reset it. Also make sure there are no magnetic devices near the screen because this will change the screen color as well. Mine will mess up every once in a while so I just unplug it while I am off running errands, plug it back up when I come home and it seems to reset itself. Good luck

Video output section circuit fault. This fault can be caused by many reasons, and called technically 'one color predominant screen'. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter". http://electronicshelponline.blogspot.com/ Mainly, loose solder terminals at the video output card can cause this. You have to look for it first. This car can be located at the neck of the CRT, will directly plugged to its back. Reasons for this can be read in detail by the above linked site. Surf it with type in "one color predominant screen"

You will find that the 3TB drive is drawing too much power. USB Flash sticks only use a small amperage, which the BR player can power. But the external 3TB will be drawing far too much. You could look at getting a USB power injector. These are USB cables with two ends, one would go to the BR player, the other to an additional USB power injector. But to be honest 3TB may be too large for the player to read

There should be a HDMI cable in the DVD box if not you need one. And make sure your TELE is HD otherwise it won't work. good luck

Hi Virginia, I have the manual link for you for your TV, basically your issue falls into INPUT issue. Kindly check if the INPUT of your TV is correct. Steps below: - INPUT SELECT button- Press to select TV or the external input (VIDEO1, VIDEO2) mode. (See USING AUDIO/VIDEO INPUT JACKS. - AUDIO (INPUT) L/R jacks- Connect to the left/right channel audio output jacks of a video camera or VCR. Note: The AUDIO (INPUT)L jack is for mono input. The sound is heard from both speakers. Use this jack for monaural audio equipment to be hooked up. These steps is in page 2 of the manual. Hope it helps. Emerson EWF2004 Owner Manual Page 2 Table Of Contents

Sounds to me as if you have not set the Playback CODEC properly.. In the Menu system, as in NTSC or PAL. Make sure that the DVD & Player are set the same Format ie: NTSC or PAL..

Use the channel change button go under channel three you might see Av and others

Check the system settings. Enter its menu option, and reset this settings according the color system that your country adopted with both on-air transmission and for video view. Set the system settings to 'Auto', if you're not sure about what to do in this case. Gopakumar Gopalan Google

U have the tv original remote wright?This problems likely parts of Close Caption problems.Look for a button that said CC on the remote press it make sure all like CC1,2,3.. to off should solved this problems.Or tries go into the main tv Menu looking for Close Captioning functions turn off to all CC1...and Text1... all to off.Will fixed this problems.

You should have its original remote control to select inputs. If you wish to buy its original remote control, you have to contact the authorized service center. If you wish to buy a universal remote control, you should know about, which brand remote control have setup code to your TV/device brand. You should first make sure about the number of digits in the codes to your device have. There are 3-digit, 4-digit, 5-digit and even 2-digit codes. You can get this detail by the code list attached to every universal remote control. The brand name of the remote control you select isn't a matter; but, its code list should have setup codes to your TV/device brand, otherwise you can't set it up with your device. Check this link and note which brand remote control have set-up codes to your device brand, and buy that brand remote control, according to availability. http://electro-medical.blogspot.com/ http://electrohelponline.blogspot.com/

You should order an hdmi cable for the WII so that it will connect. Right now you have audio (red and white) and video (yellow) the new television sets dont use that anymore.

Go to http://tvservicemenu.blogspot.com for more help