Panasonic KX-TG6021 Cordless Phone - Answered Questions & Fixed issues

The handset display is bad. This part can not be replaced because it is molded to the chassis of the phone. Replace the complete chassis or the handset and that would solve your problem.

Hello

The handset navigator key can be used

to navigate through menus and to select
items shown on the display by pressing (UP) (DOWN) (REVERSE) (FORWARD) buttons on the handset.
Adjusting audio volume

Press UP or DOWN button repeatedly while
talking.
The last settings of volume level will be memorized when you switch OFF the habdset. OK.

Unfortunately, there would be no way to prevent the specific phone from getting hot.
Also, cordless phones are not rated for heat. I would recommend a high-quality phone.

You can get the manual on the link below.

http://service.us.panasonic.com/OPERMANPDF/KXTG6021.pdf

Sorry you can only make one headset as the base headset.

when it asks for unlock press 0000. it will get unlocked... othere wise without lifting the handset press *#1234

Try powering down every thing including taking the battery out of the headset. power it all back up and try it again. if that does not work most likly during the storm your base station suffered a fatal surge and it toast.

mj

The handset may have unregistered from the phone. The instructions to reregister it are in the manual, but I'll list them here for you.

1. On the handset, press MENU 001
2. On the base unit
For models KX-TG6021/KX-TG6022/KX-TG6023
Press and hold LOCATOR until the IN USE indicator flashes.
For models KX-TG6051/KX-TG6052/KX-TG6053/KX-TG6054
Press and hold LOCATOR/INTERCOM until the IN USE indicator
flashes.
After the IN USE indicator starts flashing, the rest of the procedure
must be completed within 1minute.
3. Press OK on the handset, then wait until a beep sounds.
4. Press OFF on the handset.

you have to make sure that all the cable are plugged in and the power cable is plugged in too..

call panasonic 1-800-211-7262

The only thing I can think of is you may be in the wrong dial mode. If you do not have touch tone service you will hear the tones but it will not connect. Try setting it to pulse and see if you can call out. Check you volume or see if the mute has been set. Have you tried a different phone? you might want to borrow a phone from a neighbor to see if it is a service problem or just your phone.

Some phones answer when picked up off the charger, but with some you must press the talk button to answer. Some have a green reciever on the button. And to hang up you must press the off button or the button with the red reciever.

change the channels on the phone and reboot it

It first sounds as if the handset isn't charged properly. Check the battery status first. The manufacture advises to charge the system for approx. 7 hours before any use occurs. Second, make sure that the registration took, when programming the phone originally. I would de-register the handset by: 1 {MENU} i {0}{0}{2} 2 {3}{3}{5} i {OK} 3 Select the handset you want to cancel by pressing the desired handset number ({1} ? {4}). Then re-register by: 1 Handset: {MENU} i {0}{0}{1} 2 Base unit: KX-TG6021/KX-TG6022/ KX-TG6023 Press and hold {LOCATOR} until the IN USE indicator flashes. KX-TG6051/KX-TG6052/ KX-TG6053/KX-TG6054 Press and hold {LOCATOR/ INTERCOM} until the IN USE indicator flashes. LAfter the IN USE indicator starts flashing, the rest of the procedure must be completed within 1 minute. 3 Handset: Press {OK}, then wait until a beep sounds. 4 {OFF} Third, make sure that the display on the handset does not show "SP-Phone" in the display, if it does press the phone icon button. Fourth, Do you currently have voicemail from your phone service provider? If so, the answering machine will not answer. Make sure that the answering machine portion is turned on. Do this by: Press {ANSWER ON} to turn on/off the answering system. When the answering system is turned on, the ANSWER ON indicator lights. When the answering system is turned off, the ANSWER ON indicator turns off. If there are any further questions or comments, please post here. Please rate this solution through fix-it. Thank you

It sounds like the phone system base station is burned out.

Press the mute button to turn mute off.

I don't think that is possible on that model of phone. This is a phone with only the basic features and a fixed ringtone.

See Section 6 (Troubleshooting) Section of Service Manual and Page 118 for remedial action. Troubleshooting Guide; User Recoverable Errors - Panasonic KX-FLB852CX Service Manual [Page 81] ' ManualsLib

What did you dial when checking voice mail?

Panasonic has the manual for the KX-TGD530 cordless phone system with digital answering machine here: https://help.na.panasonic.com/telephones-fax/telephones/kx-tgd530/ . Note: the manual covers several models, including some without the answering machine feature. The current link to the manual is https://help.na.panasonic.com/wp-content/uploads/2023/02/KXTG3712_TG372x_TG373x_TG732SK_TG733SK_TG734SK_TGD43x_TGD51x_TGD53x_PNQX8349YA_ENG_ESP.pdf . I hope this helps. Cindy Wells