Lucent PARTNER18 Corded Phone - Page 6 - Answered Questions & Fixed issues

you might thave a bad vm card

Depending on the type of voicemail you have, you''ll have to login to the admin mailbox. That's done by pressing your voicemail key or intercom 777. If you have a Partnermail VS the admin mailbox is 99 with the default password of 1234. If you mave a Partner Messaging System the admin mailbox is 0 with a default password of 1234 or 123456. Once your into the admin mailbox press 9 for admin programming. ,3 for greetings, 1 for auto attendant number, 1 for day greeting 2 for night( if your using a night key at the receptionist station then it usus the night greeting) # to go past selector code, 1 to start recording 3 to accept greeting hang up when done

http://www.wedophones.com/Manuals/AT&T/PagePal%20Installation%20Manual%20Dec%201993.pdf

To turn off background music press feature 19.

Unfortunately,you can't once it's gone it's gone.

if u want to change the time in ur mobile then go to settings and then go to time setting and then u can change the time of ur mobile

Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#103"
the display should say system time and the current programmed time
enter the new time in 24 hour format
press feature "00" to logout

Yes you can get stand alone caller ID units, they simply plug into the main line in phone jack. BTW, If you have a modem in your PC you can also then use it as a telephone "anything" Call center, answer-phone, voice-mail, and of course Caller ID. A lot of the software is freeware available on the 'net for download and install.

Yes. Good recipe.. I will try it out today.

Ok, that means that you have a voice mail card in the system and since the VM ports aren't in a hunt group there trying to answer the line at the same time. I'm going to need you to look at the telephone system and tell me where and what kind of VM card you have in your system.

It depends on the voice mail, but any phone should give you access to the voice mail system 777 on the intercom, then your mailbox number and password and follow the prompts.

Carl

You are close. #103.

First I would check with the telephone compny to see if your lines are pic'd for long distance or try preceding the call with a 0221 or 1010220!

Changing prime line access on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Centralized Programming.

Enter in the extension number that you want to program.

Press ** then the lines in the order you want to access them.
press ** when your done the line access
Press feature "00" to logout

Press
Feature 00
Left Intercom Twice
Dial #103
Enter Time in Military (14:05 = 2:05 PM)
Feature 00

To program a key for an appearence of an extension, press feature 00, press the key you want to program the extension number to, then press the right intercom and the extension number. press 00 when finished

A Partner system is pretty foolproof, but Feature 10 is a Message Waiting programming button. Are you keeping the handset in the base?

It's possible that your # key is stuck. If you're truly at x10 and it's not working, try another command like #407 and see if List Number shows up. If it does, then 103 should work, if not, try another phone in that location.

Carl

Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Centralized Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.

Press feature "00" to logout

Those 2 AA Alkaline cells that are in the processor? Look for the door and make sure you keep power on the system.

I don't think its a good idea to back the vms cover rings to 8. The furthest I'd go is maybe 6.
Changing the VMS cover rings on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#321"
the display should say VMS Cover Rings and ask for an extension number
enter the extension number you wish to change
The current ring data should be displayed
enter in new data (8 ring if you wish)
press feature "00" to logout