Top 20 Amana PTH093E35AXXX Questions & Answers

bad switch, bad motor capacitor, bad motor.

The important consideration is the rotational speed and adding extra horsepower really doesn't achieve anything because the motor isn't really under 'load' as it would be in say a winch. It is better to stick to OEM Specs https://www.google.com/search?q=amana+80+sse+blower+motor ..

Question edited for a lot more clarity. The new improved energy efficient versions.

The Improved Amana R-410A PTAC Unit Uses Less Energy

Amana PTAC https://www.amana-ptac.com > products > ptac Looking to buy an energy-efficient PTAC unit for your building? Buy the new Amana R-410A PTAC unit heat pump, which reduces energy consumption by 35%. Probably this one. Talk to your installer. https://www.amana-ptac.com/products/ptac/hec154j ..

Question edited for clarity and toss in some CAPS. You can get wired or wireless. https://www.amana-ptac.com/products/ptac Fitting https://www.google.com/search?q=amana+ptac+connect+to+wall+thermostat .

Maybe something here will help you.... https://ptac4less.com/blog/troubleshoot-reset-amana-ptac/

i'm not familiar with your specific unit but ..sounds like an electronic gas value has gone bad or has a bad connection when that happened to my friend it wasn't that expensive to have it fixed .. BYW it acted like this for a while then stopped working completely

blower capacitors or motor bad

Hi, Please hit the "constant fan" button until the "on" button is removed from your Amana screen. Thank you.

bad control board

you will need to call for service. if it needs freon you cannot recharge it freon is expensive and requires a license.

copy and paste https://www.amanaparts.com/Shop-For-Parts/a4b1d693274/Model-ATB2232MRW00-Amana-Refrigerator-Parts?n=3

switch thermostat to emergency heat. Call for service the unit should be under warranty. Be aware that using heating strips will cause your electric to go extremely high.

If this is a window unit, the tray drain is located at the bottom outside. It may be clogged, but also the unit may not have been installed correctly to direct water flow toward the outside drain.

What is -the outside?
Heat pump, gas, electric heat combination?
You may need to back track, double check the Honeywell configuration jumper or software settings for your type of heating used.

Check voltage in , there could be one side of breaker burned causing only one side to come through. This happens on older main breakers frequently which messes up whole house.

Try empting the reservoir located on the bottom back of the machine.

There should be a fan symbol on your remote control. In the "mode" control, there should be the following options.. Heat, cool, Auto and fan. If you select fan, only the fan will run. No heating or cooling.

look on the manufacturing plate

F1 - Control Board Failure - Replace control board (ERC). F2 - Oven Temperature Too Hot - Replace oven temperature sensor. F3 / F4 - Shorted or Open OvenTemperature Sensor - Replace oven temperature sensor. F5 / F6 / F8 - Control Board Failure - Replace control board.