20 Most Recent
DeLonghi EAM3400 Espresso Machine - Page 5 Questions & Answers
Where can I see and purchase parts for my EAM3400?
Call Delonghi, there are two "authorized" service centers. New York and Calf. They will sell you parts. I think the one I get my parts from in New York is something like Crawface Appliance. Don't know where you can get a parts schematic.
Plastic on steamarm blew off
Those pieces (2 of them) are suppose to come off. The outer sleeve turns 1/8th of turn clockwise looking down on it and then can be slid down. The inner slides off and has a flat spot on the back to line up with the steam wand, it's held in place by an o ring. All can be ordered through Delonghi.
They are designed to be removable so they can be cleaned after each use.
Before replacing any other parts, try descaling your machine. Build up will cause heating and steaming issues.
I was cleaning the inside when the machine was
Use silicone and/or a little hose clamp. If it is rubber and it won't fit back on the nozzle, heat it up for about 2 minute with candle or lighter and then put on. As I once had to learn the hard way as I figure you have learned too, always unplug any appliance before servicing.
Water ends up in the tray
Have you checked the brew group screen? I am assuming that this is a super automatic machine, and by pressing a button it grinds and brews? If yes then the only other problem would be in the brew unit.
Delonghi Ecam 23.450S heating up please wait
'heating up please wait...' and that's it, suggests a fault with either a sensor or a control board... and in today's market, who could ever guess which?
I'm sorry this is far more philosophical than technical. I really hate to say this. Still, if any half-way modern appliance has given you 15 years' service, what more would you have expected?
Traditionally, you would have taken any faulty gizmo to a local repair expert, who would have fixed it for a charge greatly less than any replacement cost.
Today, it's almost inconceivable that the cost of even diagnosing, let alone fixing any fault would be comparable to the cost of replacing (whatever) with a new one.
The error code close door does not go off even if the service door was closed on DeLonghi Magnifica coffee machine
According to the De'Longhi UK website, the error message "Close Door" could be caused by two issues :
The brewing unit is not installed properly in the unit. You can try turning the unit off, remove and reinstall the brew unit, and then turn the unit back on to see if it reset itself.
The latch on the service door has coffee build up and is restricted from moving freely. Please clean the latch area and make sure the door closes.
If neither of these solutions work, you may need to contact DeLonghi support for further assistance.
We have a De Longhi coffee grinder KG100. The
First you pry the timer knob off and remove hopper, under the machine there a 4 tabs, using a small screwdriver pry those until the casing slides off.
Unscrew the nut holding the timer and take out timer, unplug the terminals, replace or try and repair.
Warning there a cogs and springs in there, i was unsuccessful.
Esam6700 hot water spout and milk frother not working:
Based on the information provided, it is possible that there is an issue with the machine's internal circuitry or wiring. It could also be a problem with the control board or the sensors that detect the presence of the milk jug or hot water spout.
One possible solution is to try resetting the machine to its default settings. To do this, turn off the machine and unplug it from the power source. Wait for a few minutes before plugging it back in and turning it on again. This may help reset any internal settings that could be causing the issue.
If resetting the machine does not work, it may be necessary to have it serviced by a professional technician. They can diagnose and repair any underlying issues with the machine's components.
It is also worth noting that regular maintenance and cleaning of the milk frother and hot water spout can help prevent issues from occurring in the first place. Be sure to follow the manufacturer's instructions for cleaning and descaling these parts of the machine.
Overall, if the issue persists, it is recommended to contact Delonghi customer support or a certified technician for further assistance.
Not finding what you are looking for?