20 Most Recent Whirlpool GR460 Electric Kitchen Range - Page 6 Questions & Answers

Control board issue most likely. Get a qualified service technician

F9 or F9 E0
The electrical outlet in the home or the electrical connection to the appliance may be miswired.
If your appliance was installed recently (within approximately 3 months), contact a qualified electrician to verify the electrical supply.
Unexpected power supply line "noise" during a power outage that the control detected as incorrect voltage may cause the code to display.
If any keys were pressed before a 10 second delay during power up could cause the code to display.
Resolution: Reset Power

F9 or F9 E0
The electrical outlet in the home or the electrical connection to the appliance may be miswired.
If your appliance was installed recently (within approximately 3 months), contact a qualified electrician to verify the electrical supply.
Unexpected power supply line "noise" during a power outage that the control detected as incorrect voltage may cause the code to display.
If any keys were pressed before a 10 second delay during power up could cause the code to display.
Resolution: Reset Power.

Turn power off at breaker for 30 sec turn back on then go to stove wait 1 min if code dosent come back then try using stove f9 is a power issue

Knobs are cheap if that’s all it is. What is model #?

Just tried to look your model up at searspartsdirect.com. Your model # as you furnished is not valid or incomplete

Power failure.

Are the surface burners getting hot in normal time?

Replace switch for that burner

Replace switch controlling that burner.

Most likely a power supply problem. Sounds like you are only getting 120 volts to unit instead of 240.

Sorry there is no adjustment for that.

Check your main house breaker box and be sure breaker for Range hasn’t tripped there.

Oven door won't open or shut: There could be a problem in the door hinge. Sometimes it gets jammed after self clean cycle is over. Call our expert to handle this problem. Oven Repair Service in Los Angeles Same Day Repair 25 years of exp

You have done all the suggested corrections to clear this problem, you must have a faulty oven control panel.

You have a control panel failure.

No safe.

The burner is just a slave, your issue sounds like a controller matter. The burner cannot suddenly become hotter.

Nope that is not possible.

MMMMmmmm see this: eBay: $44.99 (OR BEST OFFER!) NEW 391847690458 $10 shipping Here is a USED panel, eBay ~ same price: Whirlpool AccuBake Oven Control Panel 8304270 8304243 eBay Whirlpool Accubake Oven Control Panel 8304270 8304243 NEW Anthony (Say Thank You!)