20 Most Recent Fisher and Paykel Active Smart® E522BR Stainless Steel Bottom Freezer Refrigerator - Page 9 Questions & Answers

NEED TO CHECK IF THE DEFROSTER IS WORKING, coils will freeze up and this can cause the Freon to restrict oil flow back to the compressor causing a hard fail, do a defrost, take all the stuff out of it and put in cooler, take a fan and prop door open and fan blowing, this process can take 8-1o hrs or more, taking the coil/fan cover off speeds the process and gives you a visual of the coils and heater/defrost element if it is a metal element and the coils are free of any ice use a spray bottle and spray the heating element to see if it's stuck on and it needs a new timer All the fans must be functioning and can use regular service with this stuff it can save you thousands of dollars over the years. let me know how it works? need more help, just ask. jay fan oil eBay

It is possible that it is creating ice in the air passages due to a bad defrosting element.
Unplug it and let it melt, if the problem appears to be fixed, but comes back in a few days, that could be the problem

It sounds like either you need to have the refrigerant recharged or your compressor is going out on you. Depending on where you live, contact at least two appliance repair shops to get quotes. They are going to charge you for just showing up. Be ready for that. If it is a recharge, it is usually a flat rate plus the cost of refrigerant. If it is a compressor problem they will probably have to order the new compressor. When they come back they will charge you again for showing up plus the cost of installing a new compressor PLUS the charge for refrigerant! Good luck!

the tray with water in it at the back,theres a small pipe that drips that water.check and see its not blocked

https://www.repairclinic.com/RepairHelp/Refrigerator-Repair-Help This link should help. I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

The model no provided no information. Follow link to: https://www.repairclinic.com/Shop-For-Parts/-x6e35313074/N510t-Parts and click the Help button I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

It is best to consult your users manual first as controls are like humans nowadays. They are all different in programming features. You may have set it for an illogical temperature or a component malfunction may have occurred and the alarms alerted you to that with an error code display. No error code =no malfunction and more than likely means a human error was made. I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

Model number?

Go to their website, find customer help and call their support people.

Contact supplier to check if it a fualt. I do however suspect that it is oil for lubricating the hinge and that too much was applied. Hope this helps

check and test fan