Top 20 Vtech 5.8GHz Cordless Phone with Digital Answering System Questions & Answers

The information is in the user manual.

Select the model number to download http://www.manualslib.com/brand/vtech/cordless-telephone.html

CL means that the clock is not set and when that is the case, the answering machine wont work.

did you set a password in the setup menu for the vtech let it ring then put in the code

http://phone.manualsonline.com/manuals/mfg/vtech_communications/cs51112_1.html

Call Phone Co and see if you are programed for the Caller ID feature. In some areas this feature cost more. Whether or not you are paying for it, it may not be programmed in their switch for you?

in the handset menu, there is an option to register the phone with the base.

May be you have activated call waiting feature on your mobile.

Well, cannot find ia5862...but from ia5863 which must be similar; Manual at http://www.scribd.com/doc/64707312/Vtech-Phone-Ia5863-Manual-r2, it says... Set the dial mode If you have touch tone service, the phone is ready to use as soon as the battery is charged. If you have pulse (rotary) service, you'll need to change the dial modee• Press PROG. • Press o runtil the screen displays DIAL MODE: and the current settings• Press SELECT. The current setting blinks • Press or to select TONE or PULSE. • Press SELECT to save Hope it helps, sounds like the phone should ALREADY be on tone dial out of the box.

Enter the model of your VTech 5.8GHz system into the box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual.

If it is a wired phone change the handset cord that is the most common problem.

From the sound of it it I think its either: your mailbox is full or the feature has been turn off accidentally. Vtech's support recommend the following (I've removed things like 'make sure its plugged in' and 'is your answering system is turned on' etc..) 1 Some answering systems have an announce only option, which plays your greeting but won't record messages. Make sure your system is set to record messages. 2 Your answering system's message capacity may be full. You must erase old messages to make room for new ones. 3 If you have voicemail service in addition to your answering system, your caller's message may be going into voicemail before your answering system picks up the call. Program your voicemail to pick up at least 2 rings after your answering system is set to answer the call.

Enter the model of your VTech phone into the search box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual.

Enter the model of your VTech 5.8GHz system into the search box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual.

Since you didn't specify the model of your VTech 5.8GHz phone, please enter it into the search box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual.

Are you sure that the phone is even trying to dial? Push 1 digit and make sure dial tone is going away. Could be bad dial pad.

You've asked this question three times. If the answers to the first two aren't satisfactory, please specify the model of your VTech DECT 6.0 phone when you ask for the fourth time.

Enter the model of your VTech 5.8GHz system into the search box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual.

Enter the model of your VTech 5.8GHz phone into the search box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual.

Hi Dolores, I have this site for you where you can see the manual of 5.8 GHz Digital Phones. You may want to check the model of the phones that you have in order for you to download the manual. Hope it helps. 5 8 GHz Digital Phone Manuals