20 Most Recent
Vtech Cordless 6041 Phone - Page 4 Questions & Answers
HOW DO I RECORD A MESSAGE?
The CS6041 isn't an answering machine. Please consult the documentation for whatever answering machine or voicemail system you have on you phone line. If you need further assistance, please repost your question and specify the make and model of the answering machine/voicemail system.
Vmail light is always lit
You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.
Caller i.d. doesn't work
Please download this manual, and study e.g on page 21 About caller ID
If you subscribe to caller ID service from your local telephone company, this feature displays the
name and telephone number of the caller before answering a call (even when you are on another
call). The caller ID features of this product will work only if you subscribe to caller ID service and
both you and the caller are in areas offering caller ID service, and if both telephone companies use
compatible equipment.
Contact your local telephone company if:
• you have both caller ID and call waiting, but as separate services (you may need combined service),
• you have only caller ID service, or only call waiting service,
• you do not subscribe to caller ID or call waiting services but wish to try them.
There may be fees for these services, and they may not be available in all areas.
This product can be used without subscribing to either caller ID or combined caller ID with call waiting
service, although the caller ID features of this product will not function.
http://www.vtechphones.com/docMgt/public/art/52882/6041_manual.i4.pdf
How can i open my voicemails in my phone?
The voicemail messages are on the voicemail system provided by your telephone company. Please contact your telephone company for instructions on accessing their voicemail system.
Out of range
move closer to the base phone., You must install DSL filter between the phone line cord and wall jacket. Filter prevent noise and caller ID problem cases by DS interference.However appliance and other cordlless phones in the same circuit cause interferences.if your phone is connect HAM or DECT phone can cause interferences.if the phone plug in the MODEM or surge protector, plug the phone in another location.God bless you
Vtech 6.0 deregister
Getting startedReplace a handsetIf you want to replace a handset or reassign the designated handset numberof a registered handset, you must deregister all the handsets and thenindividually register each handset.To make deregistration easier, read all of the instructions on this page beforeyou begin. To deregister all handsets:Press and hold FIND HANDSET on the telephone base for about 101.seconds (until the IN USE light on the telephone base turns on and starts toflash), then release FIND HANDSET.Press and release FIND HANDSET again. You must press FIND HANDSET2.while the IN USE light is still flashing. The IN USE light flashes forapproximately seven seconds.All system handsets show CONNECTING... The deregistration process3.takes about 10 seconds to complete. All handsets show NOT REGISTEREDwhen the deregistration completes.If deregistration fails, you might need to reset the telephone and try again.To reset:1.Pick up the registered handset and then press talk/flash.Press OFF/CLEAR and place the handset back in the telephone base.2.-OR-1.Unplug the power from the telephone base, then plug it back in.You cannot deregister a handset if any system handset is in use.
When i'm tallking in the phone if i need to use the speaker the pwer shutt off . the phone
you must shure if the battery charge is complet or the battery is low and need change. I recomend to test the battery and change it. And proof again. Reset the phone disconnect the battery for to eliminate the " effect memory" and try again.If the problem persist you must open and test the switch speacker,can be short with the power, in the Syscon circuit.God bless you
Not finding what you are looking for?