GE 28111 Cordless Phone - Page 9 - Answered Questions & Fixed issues

Since you declined to specify the model of your phone, please select it from the list at
http://www.home-electronics.net/ge/pc/user-manuals.asp

Hello there, usually answering machines are such that after use for a considerable period of time they start to malfunction. If after you have increased the unit volume to the highest possible and yet the answering machine volume remains at a whisper then there are 2 possible lines of action. The first being to replace the units battery probably as a result of continuous use the battery has gotten low and therefore is not capable of producing loud volumes.
Second possible cause can be described as what occurs as a result of the speakers getting weak and therefore the capability for production reducing to a minimum such that it begins to sound like a whisper. In this case the cost and trouble of replacing the speaker amounts to the idea of the unit just dying as the speaker might be impossible to get and if you do get it the asking price might just be outrageous. Simply try replacing the battery if this does not work out then the unit is dying as you earlier mentioned.
hope this support has been helpful?
Thank you for visiting FixYa.

You can download the manual athttp://www.home-electronics.net/USER-GUIDES/25832_DOM_EN_CL_IB.pdf

Hello,

What this indicate means that your phone have been over power.

What you need to do to solve the phone problem is to carefully put off the the phone for some time allow it to relax it self for above five minute then put it on again.

NOTE DO NOT OPERATE THE PHONE IN ANY FORM ON TILL IT LOAD UP TO IT FINAL CAPACITY.

Then you start to operate your phone again and it will resond to your command.

Thanks for using fixya.

You can download the manual at
http://www.home-electronics.net/USER-GUIDES/29920_DOM_EN_CL_IB.pdf

http://www.home-electronics.net/ge/pc/IB/25952EE2_IB.pdf

For this problem contact your mobile service provider....

Hello.

What this indicate fro your statement means that the phone have been over operated then it capacity which is affecting the sim capacity.

what you will need to do to solve the problem is to put off the phone for some to regain it capacity for some minute between five to ten minute then put on the phone again NOTE WHEN DOING THIS YOU WILL HAVE TO ALLOW THE PHONE TO LOAD UP TO IT FINAL CAPACITY .but after all this and he problem remain it then means that the sim of the phone have been affected which will need a replacement.

with that will have to contact the service provider.

Thanks.

Here is the answer from the User Guide found on the manufacturers website. for more help go to http://www.home-electronics.net/ge/pc/IB/25942EE1_IB.pdf

Recording the Outgoing Announcement

For best results when recording, you should be about nine inches from the microphone,

and eliminate as much background noise as possible.

1. Make sure the answering system is On2. Press and hold the announce button on the base.

3. Begin speaking after you hear the beep.

4. Release the button when you finish your announcement.

NOTE: If you choose not to record an outgoing announcement, a default

announcement plays instead. To return to the default announcement after

you have recorded your own outgoing announcement, press the announce

button and release it when you hear the beep.

Sample Outgoing Announcement

"Hi, this is (use your name here), I can't answer the phone right now, so

please leave your name, number and a brief message after the tone, and
I'll get back to you. Th anks.

You can download the manual at
http://www.home-electronics.net/ge/pc/IB/27851FE2_IB.pdf

You can download the manual at
http://www.home-electronics.net/ge/pc/IB/29897GE1_IB.pdf

Press and hold the skip button for two seconds to change the language.

You can download the manual at
http://www.home-electronics.net/USER-GUIDES/25951_DOM_EN_CL_IB.pdf

1. Press the FLASH/program button until 1ENG 2FRA 3ESP shows in the display.
2. Use the CID/VOL (left or right arrow) button or the handset number pad to
select 1 (English), 2 (French), or 3 (Spanish). The default setting is "1ENG".
3. Press the FLASH/program button to confirm and to advance to the next menu
feature.

You can download the manual at
http://www.home-electronics.net/USER-GUIDES/27995_DOM_EN_CL_IB.pdf

The remote access instructions are in the fifth column of the first page of the manual at
http://www.home-electronics.net/USER-GUIDES/29888_DOM_EN_AN_IB.pdf

You can download the manual at
http://www.home-electronics.net/ge/pc/IB/29897GE1_IB.pdf

Select the model of your phone from the list at
http://www.home-electronics.net/ge/pc/user-manuals.asp

http://www.home-electronics.net/USER-GUIDES/29265_DOM_ES_CD_IB.pdf

You may download the free manual at
http://www.home-electronics.net/ge/pc/IB/25942GE3_IB.pdf

http://www.home-electronics.net/USER-GUIDES/28214_DOM_EN_CL_IB.pdf

Press and hold the announce button on the base. Record the message at the beep. Release the button when done.

You can download the manual at
http://www.home-electronics.net/USER-GUIDES/25942_DOM_EN_CL_IB.pdf