20 Most Recent
Panasonic KX-TGA101S Cordless Handset - Page 7 Questions & Answers
My answering machine dont work i try to leave my
The model is KX-TGA101CS. The answer light start to blink quickly when I try to record a message directly on the base. Then I need to disconnect the power cord to reset. If I try by the handset, I don't have the access by the menu.
Is it possible to reset the answer fonction ???
My email is
[email protected]
9/10/2010 4:07:09 PM •
Panasonic...
•
Answered
on Sep 10, 2010
New Voice Mail message
You received a message on the voicemail system provided by your telephone company. To hear the message, dial the voicemail number provided by your service provider (in many cases, this will be your own phone number), and follow the voice instructions for listening to your messages. You need to store the voicemail access # by pressing [MENU], [#] [3],[3],[1] on the handset. To access the voicemail, press [TALK], then softkey [VM]. Depending on your service provider, you may need to clear your voice mailbox to remove the notification.
7/15/2010 1:27:36 AM •
Panasonic...
•
Answered
on Jul 15, 2010
Retrieve orginal factory greeting after being erased
Hello folks, I offer no guarantee on this but it worked for me.
1. record own greetings >menu>answering device> record greeting>then after recording own greetings press OK
2. Erase own greeting just recorded >menu>answe...device>erase messa...>erase greet...>Ok
3. Then try Menu> answering device>play greeting....voila. Prerecorded message plays.
Hope This helps.
4/14/2010 3:02:09 PM •
Panasonic...
•
Answered
on Apr 14, 2010
I just erased a message
Sorry once you erase a message you can not retrieve it. The only way to get bck is to call the person who sent it to you if you know who it was.
1/15/2010 5:44:29 PM •
Panasonic...
•
Answered
on Jan 15, 2010
How to access voicemail remotely for kx-tga101s?
To access your messages remotely, after the greeting message starts enter in your remote code (default setting is "111").The unit will tell you the number of new messages then give you number commands to use additional features. When finished hang up.
12/22/2009 3:23:59 AM •
Panasonic...
•
Answered
on Dec 22, 2009
No dial tone on one of three phones, whcih have a dial tone
Reset the phone.
Unplug the battery in the handset, unplug the phone line from the base and unplug the electricity from the base. Leave everything unplugged for an hour or two instead of a couple to five minutes that way you can get more of an idea of whether your phone will work. After an hour or two plug in everything. If resetting the phone doesn't work then try the next step.
Check the volume.
If the dial tone is not heard check the volume. It may have accidentally been muted or turned down.
Check the surge protector.
Is the phone line plugged into a surge protector? The surge protector may have stopped working or blown a surge, a sudden burst of electricity, which may have caused the dial tone in your cordless phone to go. Unplug the phone line from the surge protector then plug it back in and see if you get a dial tone? It could be that the phone line plugged into the surge was loose or not plugged in good.
Try a different phone plug, outlet.
Most houses will have multiple phone plugs, outlets. The cordless phone may have lost its dial tone in its current plug but if it's plugged into a different plug, the dial tone may start. This may happen because plugs can go bad.
Check the base.
Is the base dusty and have possible dirt in the prongs where the phone sits? Lift the base and blow off dust.
Check the handset for dirt.
Blow dust off.
Rub metal connections on handset and base.
Use a pen cap or coin and rub the metal connections on the bottom of the handset. Rub the prongs, metal connections on base.
Lastly, double check to make sure the phone is plugged into all outlets good and that the phone is on.
If there is no dial tone and you've tried all the above the phone is probably no good and its time to find a replacement.
This will help. Thanks, please
keep updated. please do rate the solution positively .thank you for using fixya
12/21/2009 9:51:03 PM •
Panasonic...
•
Answered
on Dec 21, 2009
How do i retrieve telephone messages when away
A remote code must be entered to operate the system remotely. The factory code setting is "111" and you can set your own personal code by following the directions on page 31 of the phone system operating guide.
To check messages from a remote location, dial your number from any touch tone phone, enter your code after the greeting message begins, then follow the voice prompts.
Need the manual? You can download/print it here:
http://service.us.panasonic.com/OPERMANPDF/KXTG1032.pdf
12/14/2009 1:11:36 AM •
Panasonic...
•
Answered
on Dec 14, 2009
Not finding what you are looking for?