Panasonic KX-TGA560M 5.8 GHz Cordless Expansion Handset - Page 6 - Answered Questions & Fixed issues

Do you remember the password used to enable the Dial Lock? If someone else enabled the lock, you may need to consult the prior user. The steps to disable the lock: with the phone system in standby mode (no calls in or out), press Menu on the handset. Use the Up/Down arrows to reach the line labeled "Dial Lock". Press Select (the right soft key below the LCD screen). Enter the four digit password and press Save (the right soft key, again). (If the handset beeps 3 times and displays "Save error". the wrong password was entered.) If you get past the password section, press the right soft key again to disable the Dial Lock. See pages 54-55 of the manual, http://panasonic.ae/en/manuals/KX-TG2361.pdf , for information on the Dial Lock feature. I hope this helps. Cindy Wells (If a password of more than 4 digits was entered, only the last four digits are stored by the telephone.)

There doesn't appear to be a way. Sometimes on multi-phone business systems, a technician can connect a laptop with dealer software and make changes or edits that a user can't. If that particular number needs to be at Number 1, you would have to delete them all and reprogram them all again. http://www.voicesonic.com/panasonic/manuals/KX-T76xx_User_Guides/KX-T7630_User_Guide.pdf ..

Edited question for clarity. Moved to the correct Category. Worst manual ever, but it is just the handset to the base unit. Nothing mentions blocking

Installation Manual - Panasonic Support

https://help.panasonic.ca > TGEA40_PNQX7787ZA

PDF Nov. 12, 2015 - Installation Manual. Additional Digital Cordless Handset. Model No. KX-TGEA40. Thank you for purchasing a Panasonic product. 16 pages However, using the correct search query, it is mentioned here, top of the page. I can't paste, because symbols don't work. https://www.google.com/search?q=model+kx-tgea40+remove+blocked+caller ..

Could be line trouble. Have your carrier check.

you pay your phone service provider to have caller id

The KX-TGA401C handset works with the KX-TG401x, KX-TG403X and KX-TG651x phone systems among others. If you have the appropriate base, see the suggestions below. Does your handset read Ringer Off? Try setting the ringer volume. With the phone system in standby (no calls in or out for any handset), press Menu. Navigate using the Up/Down arrows to Initial Settings. Press Menu/OK. Navigate to Ringer Settings and press OK. Press OK again to enter the Ringer Volume sub-menu. Use the Up/Down arrows to set the ringer volume and press OK to save. Press Off to exit the menu system. The other possibility is that the handset is not registered to the base. Note: only 6 handsets can be registered to the base. If you previously registered 6 handsets, you need to deregister some of them. To register the handset, hold the handset near the base since you will need to press buttons on both. Press Menu on the handset and navigate to and enter Initial Settings. Navigate to Registration and press OK. Navigate to HS Registration and press OK. On the base, press and hold the Locator button for 5 seconds and the registration tone sounds. Press OK on the handset you are trying to register. If all the registered handsets start ringing, you triggered the Locate handset function. Press the Locator button again. Then do the press and hold step again. Only press OK on the handset when you hear the registration tone. You can find the manual for the KX-TG4011 here: https://shop.panasonic.com/support-only/KX-TG4011N.html . The direct link to the manual is https://ftp.panasonic.com/telephone/om/kx-tg4011_mul_om.pdf . See page 21 for the directions to set the ringer volume. I hope this helps. Cindy Wells (You can't register a handset to an incompatible base. The communication protocols don't work.)

Not sure what you mean 'configure the system to play on external device', (music on hold?) but here is your manual for both units. https://www.teledynamics.com/tdresources/bd33f39d-c9ba-4150-b610-a50b9a86e114.pdf ..

bin it and get a new one

To erase a number from your blocked calls list;

1. Press [MENU] [#] [2] [1] [7]
2. Press the [?] or the [?] button to select the telephone number that you want to erase.
3. Press [ERASE]
4. Press the [?] or the [?] button to select [YES]
5. Press [SELECT]
6. Press [OFF]

May 5, 2017

How do I unblock a number on a kx-tgea20 handset ...

https://www.justanswer.com > ... > Phone Problems

NO CLUE IF PANASONIC DOES NOT KNOW

I doubt you can. However if you log into your phone service you likely will be able to find the number in the call list.

Manufacturer site or online search

If you are UK based, number display is an addon to your land line phone service.

Ok head over to https://www.justanswer.com/phone-systems/6psar-panasonic-cordless-phones-stopped-working-no-dial-tone.html they will help you. Please mark this as helpful and follow me.

Talk to your phone provider as methods vary.

No, the KX-TG68XX phones do not work during a power failure. See page 12 of the user manual available on the product support page: https://www.panasonic.com/middleeast/en/support/product-archive/telephones-home-security/telephone/cordless/kx-tg6822.html . The current link to the manual is http://www.panasonic.ae/EN/Manuals/KX-TG6822.pdf . There are some cordless phones that allow the base to be powered by a handset. I've seen this with some AT&T cordless phone systems but do not remember any Panasonic models with all cordless handsets with the feature. A base with a corded handset will work without power for basic calls. Panasonic has a few models with the corded/cordless combination. I hope this helps. Cindy Wells

Could you have the Do Not Disturb feature engaged? Pick up your handset and press * 7 1 . Next press 0 (for all calls), 1 (for outside calls) or 2 (for intercom calls). Press 0 to cancel the do not disturb. Hang up when you hear the dial tone. There is also a call forwarding option that could be engaged. Again press * 7 1 . Press 0 to cancel any current forwarding option. You can find more about these features in the Quick Reference Guide available from Panasonic, https://www.panasonic.com/nz/support/product-archives/product-archives-business/unified-communications/business-phones/kx-dt343.html . The current link to the guide is https://www.panasonic.com/content/dam/Panasonic/support_manual/Telephone_Equipment/English/KX-DT343_KX-DT346_Quick_Reference_Guide.pdf . I hope this helps. Cindy Wells

Page 20 and onwards of the manual https://headsetplus.com/PDF/KXTS4300.pdf ..

Yes, it will remove all the blocked numbers

Try the help here. I trust it has a battery and is fully charged? https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00d8zYqmdoZ8nDPyr_YnklpmrP55g%3A1608425877540&ei=laHeX96yIIS7ggfH1LewDg&q=panasonic+kx+tga402+register+handset ..