20 Most Recent One For All URC3110 Remote Control Questions & Answers

I can help you with your URC-3220 Universal Remote Control issues.

I do not see a listing for Haier TVs in the One For All URC-3220 Code List.

But don't give up; many manufacturer's re-use others' control codes. Therefore, I recommend using the One For All URC-3220 Code Search feature to find the compatible codes to control your device.

I hope that helps.
_______________________________________________
One For All URC-3220 Manual
One For All URC-3220 Code List
One For All URC-3220 Code Entry
One For All URC-3220 Code Search
One For All URC-3220 Reassign Key

Try the code 0154 for a Sanyo TV (not a combination TV/DVD). However, the codes for a universal remote are limited to those for TVs released 6 months or more before the remote was programmed. The URC3110 documentation gives it a date of 5/2006 so if your TV is newer, you may need a newer remote.

The manual with code list for the URC3110 is available here: http://www.voxxsupport.com/images/User%20Manuals%20-%20FAQ%27s/URC3110.PDF .

I hope this helps.

Cindy Wells

i nedd a code for tv TCL with the model number urc 3110

Thank you

Hello top loan off and welcome to FixYa. Below is the code for your JVC television.

0053

If your remote control only accepts three digit numbers you will need to remove the first zero off of this code. Example 0053=053.

I hope you found this helpful and thank you for visiting FixYa.

First of all, here is the direct link to the code list for that model:

http://voxxsupport.com/images/User%20Manuals%20-%20FAQ's/URC3220codes.pdf


To view the code list just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated or the contents of the Owner's Manual.

You may need ADOBE READER installed on your computer to read PDF documents. You can download this free at WWW.ADOBE.COM if necessary. Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, and then just follow the onscreen instructions to install it.

Thank you very much and good luck.

I checked around, including a visit to the manufacturer's website, and couldn't even find a reference to the problem, much less a solution. However, I did find the following contact information which may help you find the answer you need:

E-mail: [email protected]
Internet: http://www.oneforall.com
Consumer Help Line: (330) 405-8612

330 is a Northeast Ohio area code.

Hi,
You can find the codes and the setting up procedure from below website
http://www.rockabilly.net/files/manuals/URC-3110.pdf
Thank You

Hi,

You can download the manual for your URC3110 from below website.
http://www.rockabilly.net/files/manuals/URC-3110.pdf
In this manual you have all the codes

Thanx

Many remote control codes can be found at InsigniaProducts.com. Just search for your TV model number and click Support.

Hi! Try these steps I hope it helps..

1. Find codes for each device and brand below.
2. Press and "HOLD" CODE SEARCH.
3. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
4. Enter the three digit code from the TV, VCR or Cable Box code lists.
   
   
5. Release CODE SEARCH.
6. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.

The codes for your tv are:

006,007,010,011,013,016
027,033,035,043,066,087,089

I can help you with your URC-3220 Universal Remote Control issues.

The URC-3220 codes for Toshiba TV's are: 0154, 0156, 0060, & 1256.

For complete instructions on entering the URC-3220 remote codes, please refer to my posted Fixya Tip One For All URC-3220 Code Entry.

I hope that helps.
_______________________________________________
One For All URC-3220 Manual
One For All URC-3220 Code List
One For All URC-3220 Code Entry
One For All URC-3220 Code Search
One For All URC-3220 Reassign Key

Hello, follow this link to download the manual and the codes for your remotes:
http://www.ofausa.com/remote.php?type=URC3110
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
Mark
(For replacement remotes visit www.sparky-uk.com)

use code scan feture it has to it picks it up