Sony Ericsson K610i Cellular Phone - Answered Questions & Fixed issues


You can try this data recovery program to scan your phone and restore lost data from it.Only a few steps you can get back your lost data from your phone: Recover Deleted Text Messages from Android

Sony Ericsson... | Answered on Apr 21, 2017 | 72 views


yes you will need to search online for that, i can not remember the website....sorry

Sony Ericsson... | Answered on Dec 13, 2016 | 55 views


I suggest you can approach Theunlockarena.com and specify the country,locked network of Sony Ericsson K610i.Based on the availability you can get the unlcok code along with free instructions.

http://www.theunlockarena.com/sony-ericsson-k610i/rs16wp9/

Sony Ericsson... | Answered on Jan 22, 2014 | 72 views


I suggest you can approach Theunlockarena.com and specify the country,locked network of Sony Ericsson K610i.Based on the availability you can get the unlcok code along with free instructions.
http://www.theunlockarena.com/sony-ericsson-k610i/rs16wp9/

Sony Ericsson... | Answered on Jan 21, 2014 | 75 views


K610 sonyericson problem being dead, but alive in front of a red light

Sony Ericsson... | Answered on Aug 13, 2013 | 81 views


salut je chrhcei farmater mobil souny ericsson k16im

Sony Ericsson... | Answered on May 07, 2013 | 73 views


caling volume can be increased by pressing right key during call and buzzer volume can be increasd by editing profile settings . no way to increase volume than factory default max volume

Sony Ericsson... | Answered on Jan 05, 2013 | 634 views


try master resetting the phone if that does not work then you will need to have the firmware on the phone reflash to correct this problem so you should take the phone to a mobile service center and ahve them do that for you or you can do this online at topsony.com.

Sony Ericsson... | Answered on Nov 28, 2012 | 339 views


You may try default phone and security code to remove restrictions.
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Sony Ericsson... | Answered on Oct 09, 2012 | 64 views


Hi, The Li-ion battery cahrging circuitary is some what complex. For most chargers, the charging procedure is divided into three main phases: ? Pre-charging phase ? Constant-current-charging phase ? Constant-voltage-charging phase In the Pre-charging phase, it utilizes low charging current to protect the battery. However,in most recharging situations, the charged batteries still have some voltage remaining, so the charger does not need to apply this action, and just passes it on to the next charging phase. The constant current and voltage charging phases are the main charging phase for recharging the batteries, where most of the charging energy is transformed into the battery. The maximum charging current for a battery depends on the battery?s rated capacity. For example, one battery rated 700 mAh usually can be charged at 350 mAh to 400mA, for faster charging effort. When the charged battery is Li-Ion, in the last charging procedure, the microcontroller normally maintains regular charging voltage while monitoring charging current to determine when the charging procedure should be completed. When the battery is fully charged, most of the electrical energy is converted to thermal energy, which can result in high battery temperature. In this case, the temperature monitoring function will be added for the solution. But since most Li-Ion batteries on the market also have an over-charging protection function, the temperature detect function is rarely used. So it is better to get your phone charging circuitary checked at a local store rather than to make a charger,coz both may cost you almost same. all the best my friend. regards sreejith

Sony Ericsson... | Answered on Sep 17, 2012 | 2,552 views


UPGRADE YOUR PHONES FIRMWARE
www.sonyericsson.com

Sony Ericsson... | Answered on Sep 12, 2012 | 58 views


1.Check the device's battery level for at least two bars of strength.
2.If the battery level is low, charge the battery.
3.If the issue is not resolved, remove the back cover.
4.Remove the battery.
5.Wait 10 seconds.
6.Press and hold the W key.
7.While pressing down the W key, re-insert the battery.
•The device restarts and after approximately 15 seconds, the 'Recovery' screen appears
•Release the power button but *continue holding the home button*, for another 30 seconds.
Step
Thanks

Sony Ericsson... | Answered on Aug 04, 2012 | 23 views


To Unlock SONY ERICSSON K610I get the unlock code from the site Theunlockspot.com/unlock-your-phone/rs10wp2/ and Unlock it from network lock step by step.

Sony Ericsson... | Answered on Jun 02, 2012 | 70 views


You have to first contact your service provider and ask for gprs configuration settings,then install the settings and use as default setting. After that simply go to your web browser and use it.if it still doesn't work restart your phone..rate my answer

Sony Ericsson... | Answered on Sep 25, 2011 | 20 views


Hi,

This problem is what we called "Red Blink" on our term, it is some kind of a system file corruption or GDFS error.

Anyway,fixing this problem needs a gsm gadget and a special file to recover the phone,fortunately if you are worried of losing your important data,it can be retrieve as long as this mobile technician know how to work with it. other technician directly flash or program the firmware immediately so everything will be erase,but others know how to revive the phone without doing that method,better ask and look for a mobile technician that know how to recover the phone without losing anything.

Note : You can ask the technician if he will use this method for recovering the phone without losing anything.

(Flashing/Programming the EROM & GDFS_SSW_BIN) this is what i'm talking about.

Thank you for visiting Fixya.

Sony Ericsson... | Answered on Sep 04, 2011 | 38 views


Whats the problem in your mobile microphone.. is its sound is too low or something else.??

Sony Ericsson... | Answered on Aug 26, 2011 | 161 views


Hi Dear

Actually this problem is you mobile OS, please update your reinstall the OS through the software. see the attached video and flash you OS and install again.

For supporting software click hear
Cheer

Sony Ericsson... | Answered on Aug 18, 2011 | 242 views


Hello and Welcome to FixYa!
I'll recommend you to update your phone's firmware. Its getting buggy.
To do so, you will need your USB data cable, this application and a steady internet connection.
If you have the cable, download the application from the above link. Install and run it. Walk-through is pictorial and easy to follow. Will take half an hour.
Note: Backup the data before update, because it will bring your phone as out of the box condition.

If you have any Confusion, questions or issues regarding your problem do tell me.
Thank you for using FixYa!, Keep visiting..
If you think I was of help, your token of appreciation in the form of rating and a testimonial will be esteemed.
Concerned, Nooh: FixYa Team.

Sony Ericsson... | Answered on Jul 11, 2011 | 27 views


in the settings menu, look for messaging server and uncheck the 'packet data' option.

Sony Ericsson... | Answered on Jun 30, 2011 | 20 views


factory reset your mobile if do not work so you flashed your mobile i think it is helpful to you thanks please vote me

Sony Ericsson... | Answered on Jun 28, 2011 | 223 views

Not finding what you are looking for?
Sony Ericsson K610i Cellular Phone Logo

423 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Ericsson Cell Phones Experts

Damen Wong
Damen Wong

Level 3 Expert

1950 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Marvin
Marvin

Level 3 Expert

84540 Answers

Are you a Sony Ericsson Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...