Sony Ericsson K700i Cellular Phone - Answered Questions & Fixed issues

This depends on your country policies about mobiles.
On the box of your mobile you can find the IMEI number (International Mobile Equipment Identity) of your mobile phone. This number is a 16 digits number.
You can give this number to your phone company and they will blacklist your IMEI.
When the person who has your mobile inserts his own SIM card and use the phone, they will find who has the mobile and police will take actions against him.
This is the only thing you can do.
Please have in mind that this service may NOT be offered in your country.

If you have found this solution helpful please rate it as Solved, otherwise please ask again here.

Thank you

ive forgotten the phone lock code for my mobile its a sony ericsson k700i could you help at all i need it asap is there a master code for it ?  my EIMI:-35400800764305-4-27   email me on [email protected]

for sending text messages :1.go to your message settings and check the message center number to see if it is correct2. call to your network operator customer care3. request the message center number...4.note it down5. go to message settings>message center number6. insert the number which is noted by you and save itthis solves your messaging problem ...Good luck

ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000IF Problem not Solved SoPlease New Software install in the Phone Problem will Solved

I CAN SUGGEST ONLY A HARD RESET NOTHING ELSE

hi there are many online sites found in the net that render the codes to unlock mobile at free of cost but they provide codes only for some older mobile models .to get the codes visit theunlockarena here they ask the imei number of the mobile .finally they send you the codes to unlock your mobile.

contact operator phone is locked to and ask for unlocking code. most companies gives this out for free 12 months after pruchase date

Your cell phone may be locked to a particular cell phoneprovider and in this case it needs to be unlocked to use with a different cellphone service provider. To get the security code/restriction code to unlock thecell phone from the current cell phone provider so you can use the SIM card witha different phone provider, Please click on this link and follow myinstructions :- http://www.fixya.com/support/r4049238-unlock_cell_phone If your phone provider does not help you then this WEB siteit provides security codes for a small
price. http://www.mobileunlockstore.com/?gclid=CKDb2_y2558CFSlJagodxBkDHw Try this WEB sites - http://www.superunlockcodes.com/unlock-your-phone/rs12wp2/ http://www.unlock-free.com http://www.unlock-zone.com/ http://www.unlocking.com/

i think i cannot

Hi alvinsantos1,

Try calling your service provider for the settings and further instructions.
i hope this helps.

The joystick tends to be a bit of a problem on the K series. It's not so much the build quality - it is extremely strong and durable.

The main weakness of the joystick is the poor shielding from dead skin etc that falls into the gap, floats around, and gathers in the base of the joystick. This gums up the joystick, meaning it needs to be pressed HARD to push through the **** and operate the micro switch.

It is impossible to clean with brushes, cotton buds, cmopressed air etc. The crud needs to be broken down and washed away. The simplest way to do this is with electronic contact cleaner. This stuff comes in a spray can, with a long thin tube that fits into the trigger head.

This is what you do:

Go here to learn how to dismantle your cell (that link suits K750/W800).

Once you have the cell in pieces, grab the mainboard and contact cleaner and come back here.

Fit the tube to the triggerhead and spray the contact cleaner deep into the base of the joystick. Blast it in there for a few seconds then let it drain a bit, then repeat several times. Then repeat. And again. Get rid of all that crud messing up your beautiful cell

You'll feel a bit freaked out using contact cleaner. It runs off the circuitboard like water or very fine oil and you can't help but wonder if it's going to cause damage. But the beauty of contact cleaner is it evaporates without leaving any residue, and so it won't damage the mainboard at all. It also shouldn't set off water damage indicators.

Don't spray it on the lcd though (just incase - my k700 one went a bit funny, but then came good after a day). Keep the lcd away from the spray area.

Give the board a minute or two, then reassemble phone and test joystick. You should find a radical improvement. If still not 100%, try the whole process again, untill you can get no more improvement.

If after that it still isn't working properly, then your up for a new mainboard or to have a new joystick soldering in.

Hope that helps any game peeps out there who wanna fix their joysticks themselves.

It got mine sorted - it's like brand new

DEAR FRIEND YOU WILL HAVE TO FLASH YOUR PHONE.

Hello

OK, at the link below you will be directed to a tip i wrote on how to recover your Phone lock Code, without having to reset the phone and loose all the data you have stored on it.

Click HERE to navigate to the tip.

Please do not hesitate to let me know if you need any further assistance.

Kind regards
Lock123

You can get the NCK unlock code through online..........give your IMEI number and get the unlock code for ur mobile.... i will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.
This site is nearly perfect and they were recommended highly in the cell phone forums. I used them to unlock my cell phone. contacted them and within 30 mins i had my unlock code and my phone was unlocked.
Hope this helps.

i used to have this problem before i got my samsung e370 and nokia 5200 but to fix it you have to use a bit of force on the phone by geting somehting thin and lifting cover off with it then you can remove the top joystick and clean underneath and simply place back on and push cover back on pretty simple
anoying joysticks!

hello brother there will not any password
so unluck your k700i on se tool flashing box ok
idrish 911

that

i'm not sure if you can call it Flash. it looks more of just lighting for me. On camera mode, before capturing your picture press 5 and the light will appear; the light can improve the quality of the picture almost as good as flash does.

Use bluetooth, infrared or USB cable.

the phone lock of s.e k700i is 0000 if you did not change the phone lock at all that's all...please help me how to reprogramme my s.e k700i?