Universal MX-900 Remote Control - Answered Questions & Fixed issues

Try by set the remote control with an other code said for your device. Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls. Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

There should be short circuited component/s inside the remote control. It will be good to buy a new one, rather than try to repair this remote control. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

There are carbon contact on the back side of the rubber buttons, and after a while, these do not make a good connection. It can be cleaned, but that doesn't mean it will restore the functions. Best to buy a new remote.

Check the remote control for its infra-red emission.Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV.If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience.Pull up older posts.http://electronicshelponline.blogspot.com/If the remote control is found OK; check and replace the infra-red sensor inside the TV.Contact any service technician.

Have you tried pulling the batteries for a while? That alone may fix it. Sometimes, not many, there is a reset procedure for not only for the unit, but the remote also. If that doesn't work, you will have to replace it. Next time you ask a question, please give us the type of unit, the make and model number. Without that, we would have to guess what type of product you have.

Try removing the batteries, then short out the terminals in the remote. This should discharge any residual power in the components in the remote. Re insert the batteries and it should then work ok

You should set up the remote control with the set-up codes to your device brand. Check the remote control for its infrared emission. Check it with fresh batteries. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site in "Mosaic" or "Magazine" view. It will make surf easier. http://electronicshelponline.blogspot.com/ If remote control is found OK, and have infrared emission, set it up with your device by using the set-up codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes used for devices too are given, in the order of device brand name list in alphabetical order. Do a search by type in the brand name of your device, at its search box, and press "Enter". Or, pull up older posts. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/

The obvious question here is: are the batteries installed the correct way? Here is a web page to download the operator manual: http://www.universalremote.com/pdf/MX-900OwnerManual.pdf Also; are your batteries good? are they making good contact? Has the remote been damaged by leaking batteries? Inspect and test. Do you have the original remote controls for the devices you are trying to control? If so... do they work? Remember... they will need batteries too! Are there manual switches on the device you want to control? Do they work? Can you turn it on and off? We are moving through a process to identify which items work, which are good and which are faulty.

One of two options here honey... the battery in the remote is flat and needs replacing or... the remote receiving device in the unit was blown, or now has no power to operate. Change the battery... replace the remote... if the problem remains then the problem lies in the controlled device itself. DO NOT attempt this repair yourself.

Check it ye set it up with an other code to your device. Some universal remote control will behave so. If it has set with an other code, might help you. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier. http://electrohelponline.blogspot.com/ Check this link too. http://remotesearch.blogspot.com/

The solution is not buy any product from universalremote they don't buckup thereir product

Programming procedure is too much to type in here by this window, and is not practical. If you wish to get details; check the site linked here. It have set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier. http://electrohelponline.blogspot.com/

You should synchronise the set with its set-up code after a power failure. If you wish to get more details; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier. http://electrohelponline.blogspot.com/

To which device do you want set-up codes? Provide more details, please. For more information http://electrohelponline.blogspot.com/Setup procedure, and setup code list to many popular remote controls are given.Pull up older posts.

Sorry but guess you need to find a repair shop to have a replacement screen fitted .

Check its battery. Replace it with new ones and check.

If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to some popular model remote controls are given. Select the 'Timeslide' option from the drop-down list by the 'Sidebar' at the display window. It will make search easy. Setup code list and instructions to MX remote control is there.

Check and replace its infrared emittor LED.

Your remote control need cleaning.

What is the problem you faces with this remote control?