Top 10 Nokia N95 Cellular Phone Questions & Answers

Hi there:

For months I've been searching on the Internet looking for a solution to my problem for my Nokia N95

It kept on saying that my phone memory was low and every time i deleted stuff (Including apps) the memory kept on eating away at its self with none of the memory that was there nowehere to be seen.

Save all your contacts and stuff you cherish on ur phone memory before u do this !!!!!!!!!!!!!!!!

I tried the factory reset ( *#7370# ) and the software reset ( *#7780# ) entered the code "12345" after each one and they both reset.... entered my country, date, time etc.... but it never sorted out my memory problems

Another reset is the 3 button reset... this worked on my phone and thank F**k it has :-)

what you do is switch off your n95 turn it back on but keep ur fingers pressed on the:

The star button ( * )
The number three button ( 3 )
And the Green button ( one you start to make phone call with )

did the same with the country date time and brill 140 Mb's free memory yee haaaaaaaaa

There are 3 methods to format the phone
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IMPORTANT: back up your phone and memory card first! ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

First: if the phone menus work there is a; go to menu -> tools -> settings -> general -> factory restore. note: the defualt code is 12345
Seconed method requires you to enter these into the dial number area. Nokia Code : *#7370# : NOKIA Format phone (Soft Reset)
Nokia Code : *#7780# : NOKIA Factory Reset (Hard Reset)
Found these in the N95USERS fourm. Note: the defualt code is 12345


Third: is a button combination the needs to be done during the phone powering on
Hold down. 3, * and Green Call button While holding this combination press the power button once to start the phone Note: this does not require any codes; if this works the phone will prompt you to be set up again

None of these methods format the memory card
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IMPORTANT: back up your phone and memory card first! ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

There are two methods to format the memory card
First: Go to menu -> tools -> utillites -> memory -> options -> format mass storage
Seconed: Connect your phone to your PC via the supplied USB cable. Then select Mass Storage mode on the phone. Once you PC has installed the Mass Storage device you can format the card from My Computer. Note: assuming Microsoft Windows XP or VISTA.
Billman87

Were can i get the Nokia PC Suite 6.85 for N95? because my N95 china phone can't connect to my pc. the error is MT6227. Can you help me to this problem??? pls reply to me thanks

Hi everyone

Every PUK code is unique so nobody can tell you your PUK number, but i will tell you what you can do!
1) If you still have your packet that your Sim Card came in, you should find your PUK number in there, if you don't have the packet, please read bellow.

2) You must get a phone that is on the same network as your phone and call the networks Customer Care and ask them for your PUK number, they will ask you for your phone number, then they will tell you your PUK number. Once you have done this, you will be able to reset your Pin number so you will be able to go into your phone again.

Please also remember to give me a good rating on my profile.

Kind regards
Dustin Ellse

You can unlock it, but your contract will not go away. If you signed on the dotted line for 18 months or whatever, then that is when the contract will end.
Type *#06# to displays the International Mobile Equipment Identity (IMEI) number, that's the number required to unlock your phone. However your service provider could BLOCK it permanently.

The default should be 12345 for the phone security code.

Try this. Turn off your phone, then turn it back.
While its turning press and hold the following buttons:
Call, 3, *

This should be a hard reset button that will restore your n95 to its original settings.

Here is a video which explains how to replace the screen, pretty clear.

Hope this helps

Hi
I HAVE A CHINA HANDSET, WHEN I CONNECT MY PHONE N78 IT KEEPS TELLING ME TO INSTALL MT6225 , CAN U EMAIL IT TO ME :

[email protected]

hERE is the PC Suite for chinese mobile MT6225

http://www.infinity-box.biz:80/download/public/Mediatek_Handset_Manager.rar
**************************************************************************************************************
Download USB modem driver & PC Sync Manager for MT6227 from:

http://mt6227-driver.blogspot.com/ [ scroll down to find the link for download]