20 Most Recent
Motorola Mobility L6 Cellular Phone - Page 4 Questions & Answers
LG 620G PUK CODE
PUK CodePUK stands for Personal Unblocking Key. This is a uniqueeight-digit code specific to your SIM card. This is required when the PINnumber to unlock your mobile phone is entered incorrectly 3 times. You are thengiven 10 attempts to enter your PUK code. If an incorrect PUK code is enteredafter the 10th attempt, you will block your SIM card permanently and willrequire a new SIM card from your mobile phone provider.PUK codes can be obtained through the following ways -The PUK code is in your SIM card documentation Starter Pack.If you do not have this then -Please contact your phone service provider.Your cell phone service provider can give you the PUK code once you give themyour account details and they have confirmed your identity.For details to obtain the PUK code for the SIM card, pleaseclick on this link and follow my instructions.
http://www.fixya.com/support/r5705889-puk_code
5/14/2012 6:08:49 AM •
Motorola...
•
Answered
on May 14, 2012
How do I unlock the
You can unlock your mototola l6 mobile from network lock using unlock code...Once you unlocked it you can use any gsm network sim card in your mobile at any country...I found an unlocking service at here
www.unlocking4ucom and unlocked my mobile successfully.This is the online service which offer the code at reasonable cost...Through this can unlock your mobile easily...
4/2/2012 7:53:21 AM •
Motorola...
•
Answered
on Apr 02, 2012
RESET MY MOTOROLA L6
yes aussiedale is right,
just use the security code 000000,
if it says incorrect code, take it to any cell repair place
and ask them to reset the sec code,
cant cost u more than 80 bux :D
1/19/2012 10:06:45 AM •
Motorola...
•
Answered
on Jan 19, 2012
Where is the power ic of motorola l6?
Released in 2005, Motorola has discontinued L6. But I am sure you can get a compatible power IC of other Motorola models. The power IC is located near the SIM tray.
12/4/2011 1:27:12 PM •
Motorola...
•
Answered
on Dec 04, 2011
UNBLOCK MY PUK CODE
Your PUK code is blocked...U must have entered wrong PUK thrice...To unlock cal ur service provider a get a new PUK code..cal to ur service provider from some other phone...dey will ask ur sim no...
11/25/2011 2:56:44 AM •
Motorola...
•
Answered
on Nov 25, 2011
My motorola is showing, no srevice and emergency
hi, this is not an issue actually.
when your mobile's antennae does not recieve teh signal from the tower, you see this message. if you are just far from the signal, you'll see the emergency only, now you can call the emergency number 112 only,
when you are even not in the reach of emergency signal, it displays No Service.
you can use the Emergency signal when you are in need, you have to call 112 and an agents picks your call and helps you regarding police, fire, or you can ask them to inform some matter to others in urgency..
Narendra Tirunahari
11/17/2011 4:56:27 AM •
Motorola...
•
Answered
on Nov 17, 2011
Unlock code
Hi try with default codes,if it does not work try unlock codes from your provider or from online provider...one of my friend unlocked her mobile by unlock codes from prounlocking and you can too try getting codes from them if you don't get it from your provider..
11/12/2011 7:39:13 AM •
Motorola...
•
Answered
on Nov 12, 2011
Motorola l6 to upgrade Motorola l6i
u cant do dis. L6 doesnt support L6i software.Even motorola wont give dis upgrade. u can only update ur L6 software but only if available Check motorola website
11/4/2011 6:47:23 PM •
Motorola...
•
Answered
on Nov 04, 2011
I need help about my cellphone..
evry time i send
Hi ryan, try pressing the shortcut key(what they call the smart key, its in the opposite side of the camera button) which is on the left side of your phone. that might really help. it is so wired that the command says to choose the center key but you need to press the side one.. its pain in the **** to send messages in moto L6. Hope this helps.
10/12/2011 3:04:43 AM •
Motorola...
•
Answered
on Oct 12, 2011
I dont have installer /software my webcam doesnt
Hi well then you need to obtain and download the necessary software usually available on the manufacturers website. In any event I have a link for you below to download and install it, Look for the download link carefully, it's NOT the BIG download link.... It's by the cameras picture, it reveals a rapid share DL link, just wait for the FREE one...
http://free.xiaoyenzi.com/software/driver/tinytech-201-webcam-driver/It's a GE device, so also you should go to the GE website and locate your unit and also download a manual too, this will help toy with it all.
9/30/2011 5:51:12 AM •
Motorola...
•
Answered
on Sep 30, 2011
Tower is very poor what
contact your local service provider those who given to service to you may be possible is the problem in the network IC but first you complaint in your local service provider
9/27/2011 2:31:41 PM •
Motorola...
•
Answered
on Sep 27, 2011
My phone is not charging
Hi,
The battery is bad. It may be a fake battery.
Please get a good battery for the phone.
Regards
9/21/2011 4:03:54 PM •
Motorola...
•
Answered
on Sep 21, 2011
I have a motorola L6 and i forgot its keypad
Yes, just type any password until your phone asking PUK code. PUK code is a unique number to unlock your phone if you forget your password. With puk code you can
unlock motorola L6 from old password and you can setup new password, but please pay attention when you entering that code don't make mistake for many times. It will not make your
motorola unlocked and your sim card also locked.
9/11/2011 12:15:01 PM •
Motorola...
•
Answered
on Sep 11, 2011
Not finding what you are looking for?