20 Most Recent
Motorola Mobility RAZR V3x Cellular Phone - Page 8 Questions & Answers
GPRS SETTINGS
type LIVE and send to 2567 from your mobile, you will receive settings....
For Mobile office type MO and send to 2567 you will receive settings accordingly....
6/13/2010 10:09:51 AM •
Motorola...
•
Answered
on Jun 13, 2010
I need a subsidy password for my razorv3
hey there welcome to fixya
I think that all you need to do is put a new firmware on the phone.
This will enable you to use the free "moto unlock 2005 software" with your USB lead to unlock ur V3
This did take me about 5 hours to find all the
info admittedly but it's all out there - Ignore all those trying to
charge £10 to change 32 bytes of code - forums and torrent trackers are
your friends!... Use them...
....V3 ONLY (as far as I know)...
1. First thing to do is to check your firmware. Turn your phone
off. Hold down the * and # keys, and press the ON key. Should be a
black screen displaying a few characters.
If it says bootloader 7.D0 you are in luck. Go to step 4, then step 10
2. If it says 7.E0, or 8.23 you can go here http://www.motox.info/showthread.php?t=7411and grab the (unlockable) bootloader 7.D0 and apply it with Smartmoto or similar flashing app. Then see step 4.
3. If it says 8.26 you will need the bootloader downgrader here http://rapidshare.de/files/13848110/scotty2_8.26_downgrader_v2.zi...
so you can taste the sweet freedom. There are instructions in that link
4. Put the 3 driver files on your hard drive (USBMOT2000.INF, P2K.INF, P2k.sys)
5. Turn your phone on. Connect it to your
computer. Windows should recognise it and ask for drivers. Point it to
the drivers u just put on. When it has finished, your V3 will charge
via USB.
6.Run Smartmoto. Windows should recognise some extra parts of your phone and ask u for drivers. Point it to the same drivers.
7. Once Windows has finished installing these drivers close
Smartmoto, and reboot your computer. Put the phone on flash. When
windows has loaded again open up smartmoto. Connect your phone, and set
the box in the top left of smartmoto to "computer USB Port". Hit the
"search" button and smartmoto will find your phone.
8. click on PC Flash at the bottom left. Click where it says
"browse" and find the R374_V3BL_07.D0.shx file from your harddrive.
Click on "write flash"
9. When it is finished it will ask u if you want to flash another
phone. Hit "no" and close smartmoto. Turn your phone off, and put it
into flash mode once more. Don't worry if the flash screen now looks
different - this is normal.
10. Now you can run the Motorola_unlocker_2005_free and this time
it should work. When it has finished your phone should be unlocked!!
i hope this was of great assistance to you
please remember to rate this solution thankyou
regards
magical ink
6/10/2010 6:07:53 PM •
Motorola...
•
Answered
on Jun 10, 2010
I want to set up GPRS connection with my SPICE D
Bajaj,
Firstly have GPRS activated by the service provider, MTNL in your case. They will do it if you ask their helpline.
Then ask them to sms the phone settings. Once you incorporate the phone settings you are on your way surfing. These settings are service provider specific and thats why only they can give the settings to you.
6/8/2010 8:50:23 AM •
Motorola...
•
Answered
on Jun 08, 2010
All woark off
try and start the phone in flash mode,,hold the * key and # key down at the same time as pressing the power button,if that works youll have to reflash your phone
6/4/2010 2:59:24 PM •
Motorola...
•
Answered
on Jun 04, 2010
I forgot my unlock code for my motorola razr
Dear customer
If your MOTOROLA phone ask for unlock code then press 00000000.If it is not work then flash your mobile phone by softwere HWK,JAF,UFS etc. Thank you for visit.
5/21/2010 4:14:31 PM •
Motorola...
•
Answered
on May 21, 2010
I dont remember my old security code how do I
Hello,
the truth is that you cannot unlock the phone for free.
There is a free site you can try out first but it is for soft
unlock not hard unlock.You can use this link for the soft unlock,
then trying out that with this site unlocktotalk.com/UnlockCodeInstructions.htm,
you will now try out the hard unlock with the site below
Note:hard unlock is not free,You will be charged to get your unlock code.
The only way by which you can get the unlock code for free is by calling your service provider
and requesting for your unlock code.
If you service provider refuses to give it to you, then there is no other place where you can
get a free unlock code.
Visit the link below if you are interested in buying the unlock code:
mobileunlocked.com/mobile_unlocking.php
Good luck.
5/21/2010 2:09:51 AM •
Motorola...
•
Answered
on May 21, 2010
How do I get a user Guide
hi
try this site http://cellphone.manualsonline.com/manuals/mfg/motorola/v3x.html
after visinting this site click on get this manual button and enjoy
5/4/2010 7:36:25 AM •
Motorola...
•
Answered
on May 04, 2010
Not finding what you are looking for?