20 Most Recent Sanyo Katana SCP-6600 Cellular Phone - Page 8 Questions & Answers

If you are prompted for a security code, first try the last four of your social sec. number, second try the last 4 digits of the original phone number for that phone. If that doesn't work, call 877.812.1223 and explain your situation to them.
They shuold be able to walk you thru using the master subsidy lock code to unlock.

i have the katana and my bluetooth wont connect to other phones what is wrong
what can i do

That is most likely a device issue. I would highly suggest taking it in to a store and have them run a diagnostic on the phone itself. hope that helps :)

I have the same problem... Please help

Most of the time the microphone is soldered onto the mainboard of the phone and if this is the case it is not feasable to have it fixed but the other 10% of the time the microphone is just placed on the connector pins and and held in place by the phones housing which can be knocked loose from dropping the phone. But honestly the easiest fix is to file an insurance claim through your carrier to have it replaced.

most cell phones have lithium batteries that only have a certain life span. It may be worth your while to buy a new battery for the phone

the ear piece may be dead or if its a flip phone check the flex cable

just simply take the battery out and the phone will shut off. You will not lose any contacts or other memory as long as the phone is on idle

Try going into settings, then phone info.and then my phone.
Hope this helps.

when ever your phone gets wet you are going to want to dry it out that is the 1st thing you want to do and take the battery out set it out for a few days, from what it sounds like you might have to get the lcd replace. ca you still hear? make calls?

Lock code? what code exactly where is it asking it and what are you trying todo? Default code should be

1234 or
0000

or longer debends on what code it is.

first of all instal the nokia pc suite software & attach the data cable
with phone & pc and open pc suite from desktop or start menu. you can see the photo in pc suite and download .

mohd ilyas

I have a Sanyo Katana II and have reset my lock code while enebriated and now I cannot remember the new lock code; I have gotten in with the ##3282# but need the other number

first block your sim then phone block shortly. you enter default code of your phone.

Usually you can down load the driver/photo smart software you need. Go to your provider web page and see if they have it for a free download. Also when you put pictures on a CD at a store, those CD come with photo smart/share software that you can use. If you have internet access, you can send the pictures to email, then open your email and save the pictures in the computer.
Artgirl

Most likely, you will have to purchase an unlock code from another website that is specific to your phone. There is no guarantee though that there is a code for it. You will also need a valid Sprint SIM Card. Please be aware though, if you do manage to unlock your phone, not all of the features may work. Features that are specific to the Embraq network will not work after the unlock. And you will not gain features specific to Sprint due to it not being an original Sprint phone. As long as you are ok with that then go for it. Look for the best price though. They vary from website to website.

Download Manual

To unlock your phone:
1. From standby mode, press Unlock (left softkey).
2. Enter your lock code.