20 Most Recent Motorola Mobility Bluetooth Hands Free Headset Wireless Headset - Page 6 Questions & Answers

i think it can be only used with motorola some are like that that is why i only use universol bluetooths so i can use them with all phones and computers

Passkey is 0000

Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.phpalso gives you step by step instructions on codes, pairing etc

1. From the main screen, press the Menu button and choose Settings.
2. Select Wireless & networks, then Bluetooth settings.
3. Scroll down to the device you want to delete. Press and hold until a popup menu comes up.
4. Choose Unpair. This will make the status change from “Paired but not connected” to “Pair with this device.”
5. Reboot the Droid. When it comes back up, the bluetooth device will be gone from the list.
6. Rescan and connect
   

The default passkey for this headset is 0000

the bluetooth default code is often a 4 digit number 0000 or 1234 if that does not work - post back the exact make and models of the phone and earpiece and I will try and find the user manual where it may mention the default code used

• If this solutions solves you problem, please do not forget to rate my solution.
• If not, then please comment back so I can help some more

Any device that has been washed may work for a while after being washed if not in acorrosive soap. But I would not rely on it. Do not recharge until it dries and if you can remove the battery do so untiul it dries. The good news is you probably won't damage it any more by trying it once it dries. If it's junk it is junk

Here is your manual =0) Hope that helps

http://www.motorola.com/support/v/index.jsp?vgnextoid=125b3081efa2f110VgnVCM1000008806b00aRCRD&vgnextchannel=248ae66506e9d110VgnVCM1000008406b00aRCRD

"0000"

try 1234

normally 0000 or 1234

hi
normally 0000 or 1234
hope this helps

hi
code is normally 0000 or 1234
hope this helps

0000

thats it
hope this helps

thank you
jm

Try using 0000 as the default passcode

Your headset may also be called a HS850 (may look different) but the instructions would be the same. Instruction manual is here:>
http://www.motorola.com/mdirect/manuals/HS850_%209489A97O.pdf

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thanks!

Your headset may also be called a HS850. Instruction manual is here:
http://www.motorola.com/mdirect/manuals/HS850_%209489A97O.pdf

I found a instrution maual.

Most Motorola headsets automatically go into pairing mode when you turn them on. If you have a light on your headset, it will be pink when you turn it on (and will begin flashing) and then change to blue. When the light is pink it is ready to pair. If you don;t have a light on your headset, it will stay in pairing mode for 10-15 seconds.

Turn your headset OFF then, (with your phone turned ON) in your phone's menu (usually) you'll go to Settings > Connectivity > Bluetooth (and select ON) Then select, Search for Bluetooth Devices and at this point you want to turn your headset ON.

It may take a couple of tries to get your phone to locate your headset but when it does it will identify the headset by the headsets model number when it locates it.

The pairing code should be four zeros. 0000.