20 Most Recent Cisco ASA 5520 Firewall - Page 8 Questions & Answers

Instruction book for URC22B Remote Control (includes codes): URC22B Universal Remote Control Instruction Booklet

I believe this says "I would like to change to a better modem. I currently have DishNet for TV and home phone service and I need help achieving better phone calls." From what I read Dish bundles your service "with our notable partners" and doesn't provide the phone service direct through their equipment. Maybe for VoIP but I didn't read anything on that. Based on the limited information provided... assuming you have a cordless phone, I'd attempt to determine if you have interfance happening from another device (microwave, WiFi, etc..) or just buy a new cordless handset.

Question not clear, what kind of switch????

HI I have checked and no data found for that serial number, could you check this to be correct. Thanks

Look in its manual; I would've provided a link to it, but you didn't bother mentioning what router you have.

192.168.1.1 usually. or 192.168.0.1 hope this helps

SInce you have a Cisco Router you will have to go to your web browser and type the following URL 192.168.1.1 or 192.168.0.1 and enter the username and password. The default user should be admin with a blank password on most Ciscos. Once in look for the settings and config menu and from there you can disable the DNS proxy. If you tell me which model you have I can give you more precise instructions.

Hi. What at internet are you using?

Your manual in PDF format. https://midcocomm.com/contentassets/b443bbd36fcf458a883231f34d6f24aa/cisco-dpc3828.pdf

Pressing the Voice Mail button only checks messages on the FIRST LINE. The Message Waiting Indicator (MWI) lights of all lines. Check the icon next to your other line buttons. One should be an envelope. Press that Line Button, THEN press the Voice Mail button.

You can use a standard PC or cell phone headsets with Cisco phones. With help of our adapters, you can convert computer headset, smartphone headset or cordless phone hands-free into Cisco compatible headset. Cisco IP Phones

Unplug it from the wall, wait 5 minutes and then plug it back in.

Put it in a card reader. What does this have to do with networking?

which model of router are you using?

Usually slot one is connected to your router and then you can connect 4 other computers to the switch.

Put in your operating system cd, if you have one and boot to it. Then you can repair the OS in question.

Dhcp should be on. After enabling make sure that you are receiving an IP address from your Router. After that restart your TV and try to stream a movie from Netflix.

There is one thing that you can do. Reset your router and enter the default password which came with your router. Usually username:admin password: admin. If that is not the default password, you can search the Google for your router's model default password. The biggest problem that you will have with this method is any custom configuration that you made on the router will be lost. Therefore you will need to rewrite them again.

Reset the router to its "factory" settings (including the original ID/password).

Unplug the network cables. Believe it or not the network data is electricity.