Xerox DocuColor 12 Color Copier - Answered Questions & Fixed issues
Cyan Toner always prints faded.
It is the developer. All colours should be changed at the same time. This can be accessed via the right hand side of the machine, when you remove the cover. (where the output tray is)
Docucolor 12
check scanner unit which hit the opc drum, may be hide by something
Code 14-380
Possible poor electrical contact in front door interlock switch. You need to dissassemly the switch and clean electrical contacts. Other reason of this error - malfunction in laser unit.
On the Xerox 700 Digital
1. Check the front door and the toner door are both closed.
2. If that doesn't do it try powering the printer on and off. Note be sure to allow the machine to completely turn off before turning back on.
Best of luck!
Docucolor 252 fault code 047-310
This error code indicates that the Xerox is not communicating with the finisher. The recommended method to resolve this is to power off the Xerox, wait 3 minutes after power is off, unplug the machine from the wall, wait 1 more minute and plug in and restart. If that does not help, it will require a call to the service number: 800-821-2797
Error Code 10-399
Hello sir; The problem you have can be reset, just follow the steps as below;
1, power on the machine.
2, while hold down the 0 key, press start.
3, enter the access number 6789
4, click onNVM reset/NVM initialization.
5, enter 777-018 press start.
if still have problem let me know
I have a doc 12
Hi cflathom,
Thank you for your question at Fixya,
The solution to your problem is as follows :-
- What you need to do is set the printer's settings to default, from the printer's preferences.
- Then you need to check the paper size settings in the printer as well as the computer , and they should match each other.
- Now , if that does not work , then without going into complexions , just uninstall the printer's drivers completely from the device manager and then reconnect the printer after unplugging it and restarting your computer and then reinstall the drivers back.
Hope that helps ...:) In case you have any queries, feel free to contact me.
Not finding what you are looking for?