20 Most Recent
Fortec Star Lifetime ULTRA - Page 2 Questions & Answers
Ive put dish up but theres no signal ive lighned
May not be the correct alignment. Each company has its own directions and azimuth.. So what I suggest is calling the Company, and getting the azimuth which is degree and also get the tilt or angle. If you have a compass this will help once you get this information. If not sometimes you can have 1 person inside with the tv on andon person outside trying to click it in one notch at a time.. Those are your best options at this point.. cheers and hope this helps you out
I can not get menu. I get an unstable
hi
you should replace or repair your power supply board; when you hear this kind of sound there is some chimical capacitor damadged on the power supply unit,
i hope that help;
Changed from single to twin LNB, no signal
HELLO
Here is a suggestion! Try SKEWING the LNB around a few degrees. Looking at the front of the dish, turn your LNB to the LEFT slightly (that is anti-clockwise).
Sometimes it's the little things that matter most where installation is concerned. It is also possible that due to the weight of the new LNB, the alignment may be out.
Not finding what you are looking for?