Power Acoustik PTID-8960 Car Video Player - Page 7 - Answered Questions & Fixed issues

Hello Brian, I do not know what amplifier for the car you have, but generally, the negative of your amplifier goes to negative battery and positive to positive battery, with the cable section indicated by the manufacturer of the amplifier
Then you will send the audio output from the stereo to the amplifier input through shielded cable
Discuss what amplifier and what stereo you have, indicate brand and model, to improve the response I am giving you
I await your comment
Greetings Franco Dosil

Hola Brian, no se que amplificador para el auto tienes, pero por lo general, el negativo de tu amplificador va a negativo de bater?a y el positivo a positivo de bater?a, con la secci?n de cables que indique el fabricante del amplificador
Luego mandaras la salida de audio desde el est?reo a la entrada del amplificador a trav?s de cable blindados
Comenta que amplificador y que est?reo tienes, indica marca y modelo, para mejorar la respuesta que te estoy dando
Espero tu comentario
Saludos Franco Dosil

Car Audio &... | Answered on May 12, 2019 | 29 views

Could be that the tuner has issues or the regulator that powers the tuner is damaged.

Car Audio &... | Answered on May 08, 2019 | 24 views

I could check and let you know.

Car Audio &... | Answered on May 08, 2019 | 20 views

Join the forum. 11 amps is not much power.

Car Audio &... | Answered on May 07, 2019 | 78 views

Is the player reading the CD? Do3s it load the number of tracks and actually start playing the cd (usually has a time counting with the track playing)

if so then check the cables are properly connected into the back of the head unit. Check the little block boxes too which will be on the wiring loom

Car Audio &... | Answered on May 06, 2019 | 23 views

They have discussed this issue on their webpage. In case you might, I am providing you the link :

Car Audio &... | Answered on May 05, 2019 | 24 views


I’m looking same for with rca connection. Do i connect same left and right channel connections?

Car Audio &... | Answered on Apr 30, 2019 | 461 views

I find no way to remove demo mode. However, the "work around" is as follows: Press the G button. Then, the B setup menu.

If Release locked is selected, the shutter-release button is only
enabled when a memory card is inserted in the camera.
Selecting Enable release allows the shutter to be released when
no memory card is inserted, although no pictures will be
recorded (they will however be displayed in the monitor in
demo mode). The aforementioned quote from page 250 of the manual means you avoid the problem of demo mode not saving pictures by selecting Release locked. You see, demo mode normally doesn't mind no memory card, where pictures are saved, NOT being in the camera! No card, no save, even though demo shows the pictures.

Car Audio &... | Answered on Apr 28, 2019 | 28 views

Yes an amp that is not working could cause this to happen. But I would check it out a little more because when you did the speaker test and all the speakers worked then that doesn't sound right. Find the amp and it could be just a loose connection that is giving you all these problems. Good Luck

Car Audio &... | Answered on Apr 25, 2019 | 1,082 views

Hi, try the nearest Renault dealer or link:
( https://www.onlineradiocodes.co.uk/renault-radio-codes )
or try to ask google.com (or duckduckgo.com) about "renault clio 2014 radio code"

Car Audio &... | Answered on Apr 23, 2019 | 31 views

What kind of radio?

Car Audio &... | Answered on Apr 22, 2019 | 26 views

Hie there make sure the fuse at the back of your car radio it's not blown,and if it's ok check your ground (-) wire it have a solid contact to the radio and check (+) wire

Car Audio &... | Answered on May 10, 2019 | 36 views

with that little info I'll guess your looking at remote wire coming out of your Pioneer Super Tuner car stereo. That wire (usually blue) goes to a powered antenna (if you have one). It tells the antenna when you turn the radio on (raise) or off (lower). It also can be used to send a signal to a relay to turn a amp on or off too.

Car Audio &... | Answered on Apr 22, 2019 | 28 views


Car Audio &... | Answered on Apr 15, 2019 | 27 views

I got mine. Google (not bing etc) Manufacturers site enter modal # go to help if you can not find yours and they will email it.


Car Audio &... | Answered on Apr 14, 2019 | 235 views

usually the radio/CD changer


year make model fuse box diagram

Car Audio &... | Answered on Apr 10, 2019 | 27 views

Not finding what you are looking for?
Power Acoustik PTID-8960 Car Video Player Logo

Popular Tags

20 questions posted

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Dalynn Turner

Level 2 Expert

346 Answers


Level 3 Expert

84966 Answers


Level 2 Expert

93 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides