Power Acoustik PTID-8960 Car Video Player - Page 6 - Answered Questions & Fixed issues

Do you have a CD inserted into unit? Does the unit accept cd's when inserted? If so can you hear the disk spinning up once inserted? If so is the CD a home made or store bought album? Try a different CD. If still will not play automatically look for a input button on unit.

Car Audio &... | Answered on Sep 04, 2019 | 28 views

An inline stereo noise filter could be installed to eliminate the wining noise from the alternator.

Car Audio &... | Answered on Sep 03, 2019 | 40 views

Sounds like a bad capacitor.

Car Audio &... | Answered on Sep 01, 2019 | 422 views

Contact Carozzeria directly to inquire.

Car Audio &... | Answered on Aug 26, 2019 | 30 views

i looking for the code? Anybody can help? Please!


Car Audio &... | Answered on Aug 24, 2019 | 644 views

dealer with vin and proof of ownership

Car Audio &... | Answered on Aug 24, 2019 | 29 views

Request from the manufacturer/distributor

Car Audio &... | Answered on Aug 24, 2019 | 26 views

might help if you said what make /model car you have

Car Audio &... | Answered on Aug 22, 2019 | 27 views

The output of an amplifier is usually stated differently, eg., 30 watts RMS per channel into 8 ohms.
Sometimes in addition a manufacturer might state a "total music power".

Manufacturers quote an RMS power output figure as a means of comparing one system with another but in reality these figures prove little in the real world of music and speech and the figure for total music power is even less realistic, as this figure often is based on mathematical trickery and/or notional quantities.

When an output is quoted as being into an 8 ohm it is often theoretically possible to use 4 ohm speakers instead and double the power output. Some amplifiers are quoted with both types of speakers but using 4 ohm instead of 8 ohm is likely to be an expensive mistake in most cases.

Car Audio &... | Answered on Aug 20, 2019 | 25 views

If these CD's are commercial CD's and they won't play, your CD player is broken. Best to have it looked at by a professional. Replace if necessary.

Car Audio &... | Answered on Aug 20, 2019 | 24 views

Contact the manufacturer/distributor directly to request a wiring diagram.

Car Audio &... | Answered on Aug 15, 2019 | 33 views

  • I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manuals

Car Audio &... | Answered on Aug 10, 2019 | 48 views

Hi Jackie, the blue light that blinks, you're indocating system malfunction
Disconnect all the speakers and check if you continue to do so, if you don't, check the cables and the speaker connection,
Go reconnecting the speakers one by one and try
If it keeps flashing, look for a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Jackie, la luz azul que parpadea, te esta indicando mal funcionamiento del sistema
Desconecta todos los parlantes y controla si sigue haci?ndolo, si no lo hace, revisa los cables y el conexionado de los parlantes,
Ve re conectando de a uno los parlantes y prueba
Si sigue parpadeando, busca un servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil


Car Audio &... | Answered on Aug 06, 2019 | 43 views

Car Audio &... | Answered on Jul 30, 2019 | 41 views

find another job and quit.

Car Audio &... | Answered on Jul 28, 2019 | 108 views


Perhaps this is what you are referring to.

Car Audio &... | Answered on Jul 28, 2019 | 30 views

The Kenwood KDC-355U display will read Protect if the receiver detects a short. Check all of the wiring between the unit and the speakers. If you find a loose wire or a spot where a bare wire is touching part of the car (or another bare wire), secure the wire and use electrical tape to insulate the bare wires as needed.

If these steps don't work, then the short is inside the receiver. The unit will need to be repaired. Kenwood has the documentation for the KDC-355U here: https://www.kenwood.com/cs/ce/index.php?model=KDC-355U&lang=index . The direct link to the manual is http://manual.kenwood.com/files/52d601ce30916.pdf .

I hope this helps.

Cindy Wells

Car Audio &... | Answered on Jul 23, 2019 | 54 views

Not finding what you are looking for?
Power Acoustik PTID-8960 Car Video Player Logo

Popular Tags

20 questions posted

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Dalynn Turner

Level 2 Expert

346 Answers


Level 3 Expert

85206 Answers


Level 2 Expert

93 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides