Linksys Wireless-G WUSB54GC (WUSB54GC-BP) - Answered Questions & Fixed issues

hiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Hi. Linksys Wireless-G WUSB54GC Xp-sp2 v1.4 usb wireless adapter driver (xp sp1/2/3 + vista/win7/win8/mac) can be found at driverupdate us It will take 2 mins from you to install... I hope I have helped you... enjoy

As long as you have the drivers it should be easy!

http://homesupport.cisco.com/en-us/wireless/lbc/WUSB54GC
Just follow that link select the downloads tab and then select the version of your hardware and you can download the driver. If you need any further assistance please let me know. Please take the time to accept/rate my solution if/when you find this information helpful.
Thank you,
Lee

try with Updating the Driver files with Adapter

The operating system on your computer is Windows 7 and the adapter is WUSB54GC. You are getting the Error 211 that means the drivers are not installed properly.
Though you have the CD of the adapter, you will need to download the drivers for the adapter from the web site.
Go to www.linksys.com/download , enter the model number of the adapter. select the proper version of the adapter. download the drivers for windows 7.
Now try to install the downloaded drivers. It will work.

Click here for more information about routers

install the driver first then click your micron trek then scan for your internet

It appears that the Windows service WLAN Auto Config was stopped due to an unknown reason. After re-activating this service I was able to install the wireless usb adapter 100% correctly. The Windows service WLAN Auto Config can be found if you run the program msconfig.

I have only tried this on Windows XP. If you can connect to the web using a hard line you can get this running. Make sure you have internet. Then plug the wireless adapter into the usb port and when windows ask if it can search the internet say yes. That will install a driver for the wusb54gc. Then windows will manage the device. Linksys only has the option to download the installer as opposed to just the driver. What a pain when the installer doesn't work.

Why dont you call their rma department? Here is there no. (800) 546-5797 (Option 3) and give them your rma no. so that they can pull up your information.

You can't record to a network switch?? Are you thinking it is a PVR? https://www.google.com/search?q=Linksys+sr224

16-Port and 24-Port 10/100 Switches

Linksys https://downloads.linksys.com > userguide > sr2... PDF Use this guide to install the following products: SR216. 16-Port 10/100 Switch. SR224. 24-Port 10/100 Switch. 16-Port and 24-Port. 10/100 Switches. ....

https://www.linksys.com/no/support-product?pid=01t34000003qRpaAAE

Unplug the power cables of the router and the range extender for 30 seconds. Plug in the router first. Wait for all the lights to be stable then plug in the range extender. Your range extender should now be in synchronized with your router.

Manually configuring a Linksys Wireless-N Range Extender

https://www.google.com/search?q=setup+Linksys+Extender ..

Frontier Router Login at the bottom of the Network Connections window, just below the address bar. Select Wireless Properties from the menu. Locate the Network security key field on the Security tab. You'll see your Wi-Fi network password if you click the box for Show characters.

You can use rj45 cable to it .

This seems to be a symptom of a configuration error, which can be fixed by resetting the router to factory default. Do this by finding the (often partially hidden) reset button on the device, and pressing and holding down the button, with the power on, till lights start flashing on the router. Let go of the button and allow the router to reset (can take a minute or two). You will now have reset the router to factory default. To connect to your ISP, you'll need to enter your account details (and any other specific information) provided to you by your ISP. You will also have to set a name and password for the wifi section of your router (if it has wifi) if you don't want it to be freely accessible by everyone within wifi range.

Disconnect the power to it, wait 5 minutes and power back on.

Read this discussion

Internal error - code 302 on setup - Linksys Community

just fixed one yesterday. the power pack was no good.AC wall wart, power green LED blinked endless. and the white logo, LED is dead.. a new pack fixed it. also the wrong pack used, ! do not mix them up. oops. first year 54G, v1 uses 5vdc pack. at v2, and up all want to 12vdc pack, bottom sticker on above failed was v6. you said recognized, does that mean the 4 rear Ethernet wired jacks are dead, or just wifi dead.? first the ethernet ports must work, or wifi is doomed.

Good day, This might be of help . Steps To Fix Linksys Router Error 321:- Step1:- Check the Firewall Settings To check the Firewall Settings is the first priority for the users. Then check the firewall settings of the computer/ Laptop, will be helpful to find the problem. If there is any firewall installed on the computer, so the users need to turn it OFF.During the process, the users ensure that the Local Area Connection on the computer is not disabled. The Local Area Connection should not have any static IP address assigned. If there is any then the users need to immediately set the IP address to automatic. Method2:- Run the Installation CD Again:- The users require trying to run the CD again and ensure when the CD runs, it will ask to connect the computer and the modem to the router with the cable. So the users will need to notice, that there all the lights lit up on the router. If it's not, then users will need to setup their router without the CD. The users can get the instruction to setup router manually in the method 3. Step3:- Try to Setup Router Without Installation CD Setup Linksys Router without Installation CD is another best option for users in order to completely avoid the in order to fix Linksys Router Error 321. Follow the below-given instruction to Setup Linksys Router without Installation CD: First of all, connect the main computer to the Ethernet port on the router. Then the users need to connect the modem to the Internet port on the router. Now it's time to verify the status of the light that is blinking properly. Next, users need to open the setup page of the Linksys Router and then change the Internet connection settings manually. In the setup page of the Linksys Router, the users can change the settings of the router as per their needs. Then the default IP address of many Linksys router is 192.168.1.1. And the default username and password would be an "admin". Wait for a few minutes, when the main computer is able to access the Internet, so users need to create a wireless network for their wireless computers/devices. or you can call them @ Toll Free 1-800-204-6959 that is Lynksys support.