20 Most Recent Linksys Wireless-G WUSB54GC (WUSB54GC-BP) - Page 8 Questions & Answers

For which model Ryobi product do you need the manual? Many manuals are available here: https://www.ryobitools.com/outdoor/support/manuals . Just searching for Router gave a number of options. Since most fixed base or plunge routers will adjust similarly for a given style, you should be able to find some information that applies to your router. I hope this helps. Cindy Wells

The SSID can be changed on the router when you reset the router. You have to change all of your wireless devices to the new SSID before they can work on your wireless system.

SSID is a case sensitive, 32 alphanumeric character unique identifier attached to a wireless device that connected to the router. SSID stands for "Service Set Identifier."

Are you able to access other websites? Is this your personal router changes may need to be made to settings.

Here is a video link on how to open and forward ports on a router. http://www.youtube.com/watch?v=oUNhVtnXuss

You can check your default Gateway by IP config command in CMD such as http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3997 and not able to predict the right path than follow for more detail http://www.techsupportrouter.com/support-for-linksys-router.html

Go to your command prompt and Ping your IP where you find out the default Gateway for your router. If you are not able to find the correct IP address for your router than use http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=ebe56f15763e4c27b44816c831d68f95_3997.xml&pid=80&respid=0&snid=2&dispid=0&cpage=search for checking the IP for linksys router and Linksys Router Support for any help and support.

Hello, you will have to call cust. service of the manufacturer of the product and they will connect you thru too tech support and they can walk you thru getting your password on the device. You will have to have the model, and serial number from the bottom of the device.

You need to attach a DHCP-server to the hub/switch, and configure that DHCP-server to "reserve" a specific IP-address for the MAC-address for the network adapter inside each of the computers that is to receive a "static" IP-address. For a DHCP-server, you can connect a "cross-over" Ethernet cable from one of the switch-ports to one of the LAN-ports on any "home" wired router. That "home/SOHO" router will become the DHCP-server for all the computers connected to the switch.

John, If you cannot remember the password, then you will have to reset the router. There is a small reset button either on the back or bottom of the router. Using something small (pen, pencil, paperclip, etc), press the There should be a small You'll need something like a pen or pencil to push it in. Push it, hold it pushed in for about 5 seconds, release. After that, the router should reboot and you can access the router menu by typing 192.168.1.1 in your browser. The default user name and password depends upon your device type. If you are not sure, look at the data label on the unit. Google [your router name] default user name and password. You should find a result that will provide you with what you need to access the administrator menus. Unfortunately, when you reset your router you will lose all your programmed information which you will have to reprogram. Probably not what you want to hear, but you will once again have control of your router.

Yeah, Phil is right -- there's no point downloading any EXE files to a Chromebook. EXE means a Windows Executable file, which can't possibly run on your (Linux) Chromebook. Maybe tell us what you were trying to download, and why, or what your goal was?

Yes it will work . Windows will support G-usb Network Adapter.

Sir Using 3g wireless Linksys Routers is best router you use for inter net connection, For customers using the AT&T 3G MicroCell and a Linksys / Cisco router model WRT54G2 or equivalent, the following settings should be made to the router. NOTE: Changing the broadband router / modem / gateway settings may cause other applications to stop working, and / or change the broadband router security settings for outbound data transmissions. Please see the router / modem / gateway instruction manual for more detailed information. Procedure 1.Open Internet Explorer and navigate to the router setup page at http://192.168.1.1 2.Enter the User name and Password, click OK 3.Verify the following settings: Automatic Configuration - DHCP MTU: Auto Size: 1492 4.Select the Security tab, verify IPSec Pass through is set to Enable 5.Click Save Settings I Hope Your Router Linksys Routers Problem Is resolved By now: In case you need online Linksys Routers help then follow us on for: Linksys Router Support