20 Most Recent
Netopia 3-D Reach (TER/GUSB-N1) (TERGUSBN1) 802.11g/b Wireless Adapter - Page 7 Questions & Answers
When my computer goes into sleep mode, I lose my
This is a feature of windows it's not a problem. Your settings can be changed in:
[Vista]
Control Panel>Mobile PC>Power Options
On the left side of the screen you will see "Change when the computer sleeps" click that, then click Advanced.
You will see the wireless power options in this panel.
If you need I can put some pics on my site to help walk you through it or if you have a different OS let me know XP is much the same.
Hope this helps...
Tim
Netopia
try here, they should use the same driver
Can not connect wireless
hi,
uninstall and reinstall the wireless driver and then try and connect and what u can also try is that do the configuration of the wireless driver and made it to the g/b wireless router configuration,with the help of the ip address of the computer and with the default gateway of the computer,when u paste the default gateway of the computer on the address bar it will take u to the wireless router page and then change the configuration of the windows to the wireless channel and the wireless set of b/g or b/n/g compatible....
good luck....
3d reach card
If there is a wireless g or b network within range you should be able to connected to it provided the wireless network is either open or you have the WEP or WPA key. By "within range" we are basically talking about the same building.
HELPPPPP
Do you have an installation disk that came with it for the driver? Maybe not. It can be plug and play. Okay. Plug it to a USB port. Wait a few seconds to see if it is detected by Vista (you might have a small window down-right of your screen saying new material found). If so, the wizard will help you to install it and to configure it. Otherwise, let me know at what step you are stopped.
Thanks.
HelppppP
First you want to install the drivers form the CD, then install the wireless adaptor to your computer. Make sure you have a wireless access where your at through a router or other wireless access points.
Drivers
See if this works for you
http://tmanchas.com/tech/links/index.php
Getting WEP network encryption
When You click on show all characters you simply have to type in the pass phrase you selected when you set up your router. If you forgot what you used go back and reset your router and set up the wep again and use something you will not forget. I use my phone number. Hope this helps get you up and running. If you need more help just ask.
[email protected] Send me your number and I will call you for free, I do this for a hobby so there will be no charge for my help. Let me know if you need me,
George
Ps. WEP encryption is not very secure, there is a program called netstumbler that can break in in less then 2 minutes. You might want to use the stronger encryption if you want to keep people off your bandwidth!
Not finding what you are looking for?