20 Most Recent Euro-Pro NV31 Infinity Vacuum Questions & Answers

These wands have a very small nub that locks them into place. They wear out very easily. You might have to replace the wand.

check filters and pipes for blockageshttp://www.sharkclean.com/manual/NV31_REV_0706.pdf

red light blinks when filter needs to b change hope this help thanks for reading

Hi There,

Here's a link to that part on our website if you haven't found it already:
Euro-Pro Shark Infinity NV30, NV31 Bagless Upright Roller Brush Assembly

Also if you need belts for this machine, here's another link to the belts on our website:
Euro-Pro Shark Replacement Belt Set For Shark Infinity Upright Models, Part 1085F

I hope that this information helped you. If it did, please be sure to rate the repair helpful by clicking the thumbs up icon in the top right hand corner of the repair.

Thanks again,

Chris J.
GoVacuum.com

see the schamtic below:God bless you

Hi Frrank: The Owner's Manual for the Euro-Pro Infinity NV31N Vacuum can be downloaded in PDF from the following site:http://dl.owneriq.net/d/df6c4a72-cf05-7934-2963-ee752eb0e124.pdfSee pages 15 and 16 of the PDF for instruction on replacing the single belt.If this is not the manual for your model, please reply and will try again.Thank you for using FixYa!

You might try sucking the sose out with another vacum from the wrong way. You might be able to remove the hose and push a broom handle or stiff wire through. If you have compressed air available, you could try that, outside.

Im sure you have a clog and if you remove it, you will be back in business.

Thanks for your interest in FizYa.com

What parts are you looking for?

Hello,

Yea this is common on Euro-Pro parts and models unfortunately. Unlike most manufacturers, Euro-Pro does not provide part diagrams for their vacuums that have each part labeled. They only provide a list of the most popular items like the roller brush, filters, and or belts. When I looked up your model, I only found 3 parts available to us through Euro-Pro for your vacuum; These are the only 3 parts that are availble for all vacuum part stores to sell. Whether these parts are available for purchase or not directly from Euro-Pro, I'm not sure, but you may probably contact them and inquire how you are supposed to obtain these parts. You may reach them at 1-800-798-7398. Here are the only parts that are sold through parts distributors for your vacuum;

Parts listing for Euro-Pro NV30C, NV30, NV31, NV30N, NV30CN, NV31N EU-10110 Belt EU-20175 Brushroll EU-1082FP HEPA FilterI'm sorry I couldnt help you further, Euro-Prois a strange company to deal with. If thiswas helpful to you, please be sure to ratethe repair. Thank you,Chris J.

Hi,

You'll have to contact the place you ordered the parts from. We are a DIY fix it yourself site.

Handie andie

Here you can check in this link
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160528236711&hlp=false&rvr_id=200694344830&crlp=1_263602_304652&UA=WVS%3F&GUID=a39421ac12d0a0aad4a64276ff6d5ffe&itemid=160528236711&ff4=263602_304652#ht_500wt_793
http://www.totalvac.com/1102FP.html?zmam=6843742%20zmas=1%20zmac=57%20zmap=1102FP

http://shops.godaddy.com/Totalvac-Inc/Euro-Pro-Shark-Infinity-Vacuum-Cleaner-Belts/?ISC=GGLFD1

remove 4 Phillip screws from the bottom one near each corner pry up the bottom panel then just pull the brush roller up . put the belt over the roller push the roller back in place and flip the belt over on the shaft replace cover & screws.

carpet brush won't turn when vac on