20 Most Recent Maytag EPIC MFW9600S - Page 9 Questions & Answers


The door lock is stuck or the pump hasn't removed all the water and freed the catch. Try disconnecting the power by flipping the breaker and counting to 10, and turn back on again.

Maytag Washing... | Answered on Jan 08, 2019


Sadly, this sounds like a bad transmission in the washer. Unless it is a newer, high-end washer, fixing it is probably not going to be cost effective. IMNSHO, based on experience, once a major breakdown like this occurs in an appliance, other major failures aren't usually far behind. If it isn't still under warranty, get a new one :/

Maytag Washing... | Answered on Jan 03, 2019


Depends on what you have to do get water to shut off. If cutting off at faucet is only way, then replace valve.

Maytag Washing... | Answered on Jan 02, 2019


Your timer is most likely bad. The timer is the part with the knob that you use to set the wash. Very easy to replace.

Maytag Washing... | Answered on Dec 30, 2018


Unplug it for 5 min's

Maytag Washing... | Answered on Dec 25, 2018


the transmission motor is bad i could fix less than a repair person could but im not near to you

Maytag Washing... | Answered on Dec 25, 2018


"LF" on display (Long Fill - no water or insufficient water supply) Press POWER/CANCEL to cancel the cycle. Unplug washer or disconnect power.
Plug in washer or reconnect power. Re-select cycle and press START/PAUSE. "F9E1" on display (Drain Problem) Press POWER/CANCEL to cancel the cycle. Unplug washer or disconnect power.
Plug in washer or reconnect power. Re-select cycle and press START/PAUSE. "SD" on display (Suds Routine) When excessive suds are detected, a suds routine automatically starts. This routine removes extra suds and assures proper rinsing of your garments. "SD" is displayed during rinsing and at the end of the cycle to inform you that the Suds Routine was activated. Use only HE (High Efficiency) detergents. "F--E--" Variables (Washer Problem) Press POWER/CANCEL to cancel the cycle. Select RINSE, DRAIN & SPIN if there is excessive water in the washer. Re-select cycle and press START/PAUSE.

Maytag Washing... | Answered on Dec 23, 2018


Lf = long fill. Make sure screens in hoses and water valve are clear of debris. Also be sure hot and cold water hoses aren’t reversed.

Maytag Washing... | Answered on Dec 01, 2018

Not finding what you are looking for?
Maytag EPIC MFW9600S Logo

54 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Maytag Washing Machines

  • Maytag Washing Machines

Most Popular Question

problem f02 error

  • Washing Machines
Loading...