20 Most Recent Maytag EPIC MFW9600S - Page 8 Questions & Answers


This link Maytag web address may help you ...
https://producthelp.maytag.com/Dishwashers/Dishwasher_Product_Assistance/Dishwasher_Not_Starting_or_Not_Operating

Maytag Washing... | Answered on Feb 04, 2019


hi there, go here https://www.manualslib.com/products/Maytag-Mhwe300vf00-277610.html and look for the button lock setting. if this is not this issue please cut off the breaker or unplug the machine for 2-3 minutes and reapply power then try. there is not much you can do beside reset it and push a few buttons it might actually need repair
good luck
https://www.6ya.com/mr.mike

Maytag Washing... | Answered on Feb 02, 2019


The dispenser may be clogged with softener residue.

Maytag Washing... | Answered on Jan 30, 2019


I am not sure what symptoms would indicate bad braking.
Does it have trouble shifting from agitate cycle to the spin cycle? That is when the brake activates(between cycles).

Evidently part 22 is the entire brake assembly.
https://www.appliancepartspros.com/03-clutch-brake-parts-for-maytag-la482.html

Maytag Washing... | Answered on Jan 27, 2019


Check the door switch to make sure that it is not loose. If it is not loose, it may have failed.

Maytag Washing... | Answered on Jan 26, 2019


USUALLY IT HAPPENS WHEN THE TRANSMISSION DOES NOT SHIFT INTO FINAL SPIN WHICH IS HI SPEED COULD BE CONTROL BOARD OR THE MOTOR ITSELF A REPAIR SERVICE MIGHT BE THE ONLY RECOURSE THERE IS . SORRY

Maytag Washing... | Answered on Jan 26, 2019


OMG. So much blathering BS. I just fixed this by unplugging the machine FROM THE WALL for 20 minutes. Put the plug back in. Low and behold. Door unlock, everything reset, all is well.
Grow a brain people - just reboot ????....

Maytag Washing... | Answered on Jan 25, 2019


Remove the belt from the pulley under the machine.
check shaft and thrust bearing for damage. If good, go back to top of machine and take out the agitator.
check shaft splines for condition in agitator and shaft, if all ok, rotate shaft with slip pliers or the like and if you rotate it and get grinding noise your transmission is bad and needs to be replaced.
my thoughts are the 1980 machine has had a good life and it's time for a new machine.
Good Luck,
Gary

Maytag Washing... | Answered on Jan 24, 2019


Could be a number of things. Belt, control board, door lock, bearings.

Maytag Washing... | Answered on Jan 19, 2019


tub capacity of my LAT 9804 top load washing machine?

Maytag Washing... | Answered on Jan 11, 2019

Not finding what you are looking for?
Maytag EPIC MFW9600S Logo

54 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Maytag Washing Machines

  • Maytag Washing Machines

Most Popular Question

problem f02 error

  • Washing Machines
Loading...