20 Most Recent Dual XDM6830 CD Player - Page 2 Questions & Answers

Check all wiring/connections, fuses, etc. and don't forget the one on the back of the deck itself!

I presume that if it doesn't say so, it ain't so.

Rewire the player to a free (unused) power lug in your fuse box and be sure your ground is connected to something metal instead of tapping into a wire loom.

heres a manual for it,it may help https://www.dualav.com/support/manuals/mxd337bt.pdf

What ohms are the voice coils, and what ohm rating is the amplifier you are hooking it to rated at?

Hi there, in reality it does not work that way. The proper way is to contact the company that makes it and become a authorized service and repair person with the company which often inn wolves you paying for it, next after approved you need to buy the access to schematics from the company. Alternatively you can ask you question to get a better answer. You should also post pictures and picture of the circuit board where it connect, list you capabilities so I know what instructions to give, be ready to use a multimeter or a volt o meter.good luck https://www.6ya.com/mr.mike

I have a Ford F-150 2001 and I'm trying to install xDVD8181 in it and I bought the accessorie for it from wall Mart and I have power to the radio but no sound what do I do

http://www.manualsonline.com/

Search up Google and enter your amp (name and model #) , and it should show you a pdf manual of that amplifier and show you that , possibly a 3-channel set-up would fit your needs, 4 ohms is usually the lowest minimum for the middle mono channel. Then, you could run the other two L & R channels for your mids and tweets (in stereo) on the remaining two channels; thereby in keeping a single amp to run the entire system. Also, 2 ohms would usually be the normal minimum on same amp for stereo amp output abilities, so that could easily run 5 speakers off one amp. I did it for years on a RF-600a4 with one 12" sub, and two 6 1/2" midbass, and two tweets (usually Morels, or Image Dynamics). Hope that helps...

See if amp is bridgeable to 2 channels

Mantener presionado AUDIO durante m?s de 3 segundos para acceder al men? de configuraci?n. Presionar moment?neamente AUDIO para seleccionar entre las funciones del men? y girar la perilla del volumen hacia la izquierda/derecha para ajustar o activar la funci?n deseada.

How to get the memory band of the DVD xdvd 9101 dual http://translate.google.com/ http://www.dualav.com/support/manuals/xdvd9101.pdf https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&ved=0ahUKEwjXm77qmPHaAhUCwYMKHbdsCFQQFghHMAQ&url=https%3A%2F%2Fwww.vintageshifi.com%2Frepertoire-pdf%2Fpdf%2Ftelecharge.php%3Fpdf%3DDual-XDVD-9101-Owners-Manual.pdf&usg=AOvVaw2JFBvd7vMFZX2LqEV-c0rw

?speaker bar wire to rca? Sub?--try utube

not sure if this link will help you out but it looks like you might get the manual here at this link. Schematic for dual xpe2700 amplifier Google Search

Yes the radio has an amplifier built into it.

i would not do it a 4 channel can produce bass but it wont last long if its even bass compatible. your best bet is to get a small bass class D amp.

Orange is usually illumination. Try wiring up without and see if all works.

Try dual xdvd210 wiring diagram Google Search

You would need to contact Dual for these.

Would need the model number. They made several different models over the years.