20 Most Recent
Mitsubishi WD-Y65 65" HDTV - Page 6 Questions & Answers
How do I fix Mitsubishi medallion HD TV blinking light of death?
Hi,
Your tv needs a dm power board repair,this little board is located inside the metal box where digital antenna plugs in.
you'll need to remove this little board and send it to us for repair,we are on ebay,look for texas tv parts.
also you can just search at ebay's search bar for this repair by typing this #:330700000004.
you can also visit our new born store :www.texastvparts.com
thanks a lot!!!
The model is WD-52627, the screen flickered and then turned a light green and lavender. We still see the tv show
Hi Jenell
Looks like you might have lost one of your primary colours. RGB
A section of the internal electronics controls Red Green Blue.
Check for loose plugged in cables on back. Antenna or Cable
Try inputing a signal from another external video device like a hard drive.
Try a couple of hard slaps on the back to see if it changes.
If it does then you may simply have an internal bad connector or loose wire.
Make sure the air holes around the unit are clean to allow cooling air to flow.
Other than that, you will need a technician to open it up.
Cheers
Why is my picture color distored color?????????
Your color is distorted because your color wheel is probably going bad. Try resetting all the picture values first. Sometimes they need to go back to normal when the lamp is changed. Lamps only provide white light and have no bearing on colors unless they are very dim. Also check your cables. a loose or bad cable can cause this as well. Lastly make sure your new lamp is made by Osram or Philips. knock offs wont work.
Not finding what you are looking for?