20 Most Recent Sharp AR-5320 Black and White Copier - Page 7 Questions & Answers

Which operating os?

One of your covers is not closed. Sometimes they look closed but really are not. I would start with the right side cover the latches on those brake all the time. Just use a piece of scotch tape to hold it shut if the latch is broken. I’m happy to help further over the phone at https://www.6ya.com/expert/ethan_e84416e0b13809d2

Put on ur machine & go 2 ur display board & press the C button twice then ur display will go off then input figure 1 & 4 that is 14 then press the print button. this f2 is memory failure due to low voltage or sudden light fluctuation

Explain better, what is 41

Put on ur machine & go 2 ur display board & press the C button twice then ur display will go off then input figure 1 & 4 that is 14 then press the print button. if this fails then remove ur fuser unit & check d hallogen lamp,test d lamp wt ur ohms meter; it will deflect the meter if its ok & if not change it. then there is a thermolfuse that is close 2 ur lamp check wt ohms meter if its good or bad

Put on ur machine & go 2 ur display board & press the C button twice then ur display will go off then input figure 1 & 4 that is 14 then press the print button. if this fails then remove ur fuser unit & check d thermistor, clean any dirt b/w d fuser roller & the thermistor, u can test d thermistor by connecting the two terminal 2 ohms meter

download from this url.

http://panasonic.net/pcc/support/fax/asia/table/mb772cx.htm

Replace drum and cleaner blade. Check also the heat roller clean or replace if wornout.

Exposer lamp / Exposar operator circuit not work

Am sorry to tell you that sharp only works with windows operating system.

consultez la page suivante (en anglais):

http://support.sharp.net.au/drivers/

Vous y trouverez le pilote de l'équipe que vous avez, il suffit de sélectionner votre système d'exploitation.

You can download the drivers from www.driversdown.com then select any model that you want. Alternatively you can get the original cd that came with the machine.

Main motor lock. Your drum may be jammed in the cartridge, occasionally the urethane blade that cleans the drum may flip and hold the drum. Or your waste auger may be choked with toner.

5 consecutive paper jam in fusing unit.Need to reset by sim 14.

Need more info.

E 7 what...?Please press copy switch to get full error code?